Thermax CP3 manual Inspection Upon Delivery, Important Safety Information

Page 5

Inspection Upon Delivery

Carefully unpack and inspect the Thermax CP3 and be sure all components ordered are included. Orders might be packed in more than one box.

NOTE: Contact the carrier immediately regarding any damage incurred during shipping as it is your responsibility to file a damage claim with the carrier.

Important Safety Information

1)To prevent the possibility of electrical shock, always unplug the system from the main power source before physically inspecting or attempting to repair the system.

2)Inspect system daily, especially when used by someone else. Inspect for damaged components such as loose wires, frayed cords, missing ground pin, etc.

3)Only operate system when it is properly grounded. Improper grounding could result in serious or fatal shock!

4)When operating the system around water, during flood restoration, etc., always outfit yourself properly with rubber-soled shoes or rubber boots and do not set system in standing water.

5)To keep from voiding your warranty, use only those cleaning solutions manufactured by Thermax and never use solvent based products.

6)After use, always thoroughly rinse and clean both recovery and solution tanks. If using recovery tank to store hoses, or other miscellaneous items, always clean items before storing them in tanks.

7)Do not operate solution pump dry.

8)Do not store where temperatures drop below freezing, as this may damage the pump.

9)Always use defoamer in recovery tank to prevent the motor from being damaged from overfoaming.

10)Extension cord should have a minimum rating of 12/3 (#12 cord). Extension cord should not exceed 50 feet.

11)Never open up the system when there is water in either the solution or recovery tank, remove the solution and waste water first.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CP3 Table of Contents Message from the Corporate Office Identifying Features Inspection Upon Delivery Important Safety InformationExtraction Cleaning Procedure Set-Up ProcedureGeneral System Maintenance System Clean-UpOptional Packages & Accessories Optional Accessories World’s Liquid Carpet & Upholstery Steam Cleaning Solutions Air Purifiers and SolutionsThermax CP3 Wiring Diagram Thermax CP3 SpecificationsTroubleshooting Condition Cause Correction Thermax CP3 Schematic GASKET, DOME, CP3/CP12 Thermax CP3 Parts ListFloor Wand Schematic Item no Thermax no Description Floor Wand Parts ListUpholstery Wand Schematic Upholstery Wand PArts list Power Brush Schematic PLATE, WEAR, STMHD, PB309 Power Brush Parts ListAdditional Commercial Units CP3 Warranty 06-312-02 4/07

CP3 specifications

Thermax CP3 is an advanced cooling solution designed for various industrial and commercial applications. Known for its energy efficiency and innovative features, the Thermax CP3 stands out as a reliable choice for businesses seeking sustainable temperature control.

One of the main features of the Thermax CP3 is its use of advanced refrigerant technology. The system employs eco-friendly refrigerants that minimize environmental impact while ensuring optimal cooling performance. This commitment to sustainability is further enhanced by the system’s energy-efficient design, which significantly reduces electricity consumption compared to traditional cooling systems.

The CP3 features a robust scroll compressor that enhances reliability and longevity, providing consistent performance even under varying load conditions. This compressor technology is pivotal in ensuring reduced operational noise, making the CP3 ideal for settings where low noise levels are essential.

Another significant characteristic of the Thermax CP3 is its modular design. This allows for easy installation and maintenance, ensuring that companies can adapt the cooling systems to suit their specific needs swiftly. The modular setup also facilitates scalability, enabling businesses to expand their cooling capacity without the need for extensive redesign or infrastructure changes.

The Thermax CP3 also incorporates smart technology for enhanced operational efficiency. It features an advanced control system that monitors various parameters, allowing for real-time adjustments to optimize performance. This intelligent system helps in detecting anomalies, leading to better predictive maintenance and reduced downtime.

Additionally, the CP3 is designed to operate under harsh environmental conditions. Its rugged construction ensures durability, while its corrosion-resistant materials extend the lifespan of the unit. This makes it suitable for use in various industries, including pharmaceuticals, food processing, and chemical manufacturing, where temperature control is critical.

Furthermore, the unit’s low footprint makes it an attractive option for urban settings where space is a premium. The CP3 offers high cooling capacity without occupying substantial ground area, making it ideal for businesses looking to maximize their operational space.

In summary, Thermax CP3 is not just an ordinary cooling solution; it embodies the future of sustainable cooling technology, combining energy efficiency, modularity, intelligent controls, and robust construction into a single package. This positions it as a preferred choice for industries aiming for both performance and sustainability in their operations.
Top Page Image Contents