Operating your radio - FM
1.The Wire aerial located on the rear of your radio is for DAB/FM recep- tion. The wire should be fully extended and positioned for optimum reception.
2.Press the On/Off button to switch on your radio. The display will show "Roberts DAB digital radio" for a few seconds.
3.Press the FM/DAB Band button to select the FM band.
4.Press and immediately release the Auto Tune button, your radio will scan in an upwards direction (low frequency to high frequency) and stop automatically when it fi nds a station of suffi cient strength.
5.After a few seconds the display will update and show station name.
6.To fi nd other stations press and release the AutoTune button as before.
7.To scan the FM band in a downwards direction (high frequency to low frequency) press and hold down the AutoTune button for 0.5 seconds and then release.
8.When the waveband end is reached your radio will recommence tuning from the opposite waveband end.
9.Adjust the Volume, treble and bass controls to the required settings.
10.To switch off your radio press the On/Off button.
2 | 3 |
4
9 | 9 | 9 |
10
13