Roberts Radio CRD-39 manual General, Specifications, Circuit Features, Power Requirements

General

Do not allow this radio to be exposed to water, steam or sand. Do not leave your radio where excessive heat could cause damage. It is recom- mended that the DAB band be used wherever possible as better results in terms of quality and freedom from interference will usually be obtained than on the FM band.

•The name plate is located on the bottom panel.

Specifications			Circuit Features
Power Requirements
Mains	AC 230 volts, 50Hz	only	Loudspeaker		2 x 76 mm
Battery (Remote control)	2 x AAA size
			Output Power		3W into 4 ohms
Frequency Coverage
FM	87.5-108MHz		Headphone socket		3.5mm dia
DAB	174.928 - 239.200MHz		Line in socket		3.5mm dia
			Digital optical output socket
			Aerial System	FM	Wire aerial
				DAB	Wire aerial

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri) 32