Operating your radio - DAB
1. The Wire aerial located on the rear of your radio is for DAB/FM recep- | 2 |
tion. The wire should be fully extended and positioned for optimum reception.
2.Press the On/Off button to switch on your radio. The display will show "Roberts DAB digital radio" for a few seconds.
3.If this is the fi rst time the radio is used a quick scan of UK Band III DAB channels will be carried out. The display will show "Autotune Quick scan". If the radio has been used before the last used station will be selected.
4.During Autotune as each group of stations is detected the bottom line of the display will show its name and the station count will be updated. The top line of the display shows a bargraph indicating progress of the Autotune.
5.When the Auto tune is complete the fi rst station (in
6.If the station list is still empty after the Autotune your radio will display "No Signal".
7.If no signals are found it may be necessary to relocate your radio to a position giving better reception.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 6 |
|