Transferring the center hinge bracket

Cenler Right

(a)Remove the hinge bracket (and shim gbed to it) from the center right side of the cabinet by removing the three outermost Torx screws

(b)Remove the three outermost Torx screws from the center left side of the cabinet and screw them into the holes at the right side uncovered in Step (a) above_.

Do not remove

this screw

CenJerLeft

(c)Place the center hinge bracket over the holes at the center left side of the cabinet, insert the screws you removed from the opposite side, and tighten them.

Transferring the top hinge

Interchange hinge and screws at top right with screws at top left of the cabinet. Do not tighten the screws on the hinge side at this time

Transferring door handles

Freezer door

HandleI_

(a)Remove screw holding handle to top of door,

(b)Remove three screws holding handle to bottom of door.

(c)Transfer screw from handle hole in top right of door to opposite side_

(d)Transfer plug button in top left of door to opposite side

(e)In reverse order, reassemble handle to right side of door using screws removed in Steps (a) and (b).

Fresh food door

LongHandleShortHandle

(a)Transfer two screws in bottom left of door to opposite side, (Wait until handle is moved before reinstalling Frontscrew.)

_continued next page)