Shelves and Storage Drawers
Adjustable Shelves
Shelves in the fresh food and freezer compartments are adjustable, enabling you to make efficient shelf arrangements°
Tilt 'N Store Bin
(on some models)
Adjustable
To remove a shelf:
Tilt the shelf up at front, then lift it up and out of the tracks on the rear
wall of the refrigerator.
To replace o shelf: Select desired shelf
height. With the shelf front raised slightly, engage the top lugs in the tracks at the rear of the cabinets Then lower the front of the shelf until it locks into position.
[]Lift up and out
[_ Engage ,,['_
,o,o,o...,a.o i j
out for easy access. Bin can be removed and
relocated on either the freezer or fresh food compartment door.
Handi Store Bin
(on some models)
This removable
door_ It has been designed for convenient storage of those
items that do not fit easily into a door bin or
Removable Bins on the Doors
Bins on the doors keep frequently-used items
within easy reach_ Bins can be carried from the
refrigerator to the work area, and can be relocated on the doors_ Divider on some models can be
moved from side to side to keep items such as small jars and bottles so they won't tip, spill or slide in the bin.
Handi Dishes
(on some models)
through lids fit into a rack
that hangs on the fresh food or freezer compartment door. Dishes can be removed from and returned to
the rack as needed, and the rack can be removed and relocated on either door in the same manner as the adjustable shelves_
Dishes and lids are safe for use in microwave ovens, refrigerators, freezers, and are
Caution: Lids cannot withstand the heat generated in conventional ovens. Dishes and lids are not designed for
To open, push the latch up and pull the bin handle forward.
To avoid damaging the refrigerator, make sure the bin is closed and latched before closing the refrigerator door.
ii
[ | Bin housing _ _,_ |
To remove the bin, lift it up and out of the bin housing.
To relocate the Nandl Store unit, lift the bin housing up and out of the slots on the door, move it to the desired new location, and lower the hooks on the housing into the slots on the door° You do not have to remove the bin from the housing when relocating the uniL
6