Panasonic SC-BT203 warranty Speaker settings, Adjusting the sound lag between speakers, Delay time

Speaker settings

Adjusting the sound lag between speakers

Delay time (	ms	)
	0.0

For optimum listening with 7.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position.

If you have to place the center, surround and surround back speakers closer to the seating position, adjust the delay time to make up for the difference.

If either distance A or B is less than C (D below), find the difference in the relevant table and change to the recommended setting.

ms

1 Press [3, 4, 2, 1] to select the distance box ( 0.0 ) and press [OK].

2Press [3, 4] to select the setting and press [OK].

Approximate room dimensions

	C			: Actual speaker position
L	C	R
	A		SW	: Ideal speaker position
		C
LS LS		B RS	RS
		B		A BC : Primary listening distance
	LB	RB
LB		RB

Center (C)

L	ms	C	dB	R
	0.0		0
Complete			dB	SW
Test			0
LS	dB	ms	dB	RS
	0	0.0	0
LB	dB	ms	dB	RB
	0	0.0	0

[LS (L)] Surround [RS (R)]

[LB (L)] Surround back [RB (R)]

Circle of constant primary listening distance

A Center speaker

Difference	Setting
Approx. 34 cm (1 ft. 1 in.)	1.0 ms
Approx. 68 cm (2 ft. 2 in.)	2.0 ms
Approx. 102 cm (3 ft. 4 in.)	3.0 ms
Approx. 136 cm (4 ft. 5 in.)	4.0 ms
Approx. 170 cm (5 ft. 6 in.)	5.0 ms
B Surround/Surround back speakers
Difference	Setting
Approx. 170 cm (5 ft. 6 in.)	5.0 ms
Approx. 340 cm (11 ft. 1 in.)	10.0 ms
Approx. 510 cm (16 ft. 8 in.)	15.0 ms

Adjusting the speaker level

operations

Volume (Channel balance) (	dB	)
	0

(Effective when playing multi-channel audio)

1Select “Test” and press [OK]. A test signal is output.

Front (L) ——)Center ——)Front (R) ——) Surround (RS)

:; Surround (LS)(— Surround back (LB) (— Surround back (RB)

2While listening to the test signal, press [3, 4] to adjust the volume of each speaker.

The volume can be adjusted between r6 dB to s6 dB.

≥Set each speaker level according to the volume of the Front (L) and Front (R) speaker volume respectively.

3Press [OK].

The test signal stops.

≥No signal is output for the subwoofer. To adjust its volume, see page 18, Adjusting speaker level during play.

Center (C)

	L	ms	C	dB	R
		0.0		0
Test	Complete			dB	SW
	Test			0
Surround					Surround
[LS (L)]		dB	ms	dB	[RS (R)]
	LS	0	0.0	0	RS
	LB	dB	ms	dB	RB
		0	0.0	0

[LB (L)] Surround back Surround back [RB (R)]

Advanced

∫To finish the speaker setting

Press [3, 4, 2, 1] to select “Complete” and press [OK].

RQT9508

41