
Sound |
| Page |
|
No sound. | ≥Turn the volume up. | 19 |
|
Low volume. | ≥Turn the muting off. | 19 |
|
Distorted sound. | ≥Check connections to speakers and other equipment. | 9 to 14 |
|
Cannot hear the desired audio | ≥Select the corresponding source. | 17 |
|
type. | ≥Press [AUDIO] to select the audio. | 20 |
|
| ≥Ensure the speaker settings for your speakers are correct. | 41 |
|
| ≥When | 38 |
|
|
|
| |
| DTS Digital Surround. | — |
|
|
| ||
| ≥Audio may not be heard when more than 2 devices are connected with HDMI cables. | — |
|
| Reduce the number of connected devices. | 39 |
|
| ≥To output audio to a device connected with an HDMI cable, set “HDMI Audio Output” to “On” |
| |
| in the Setup menu. | — |
|
| ≥Depending on the connected equipment, the sound may be distorted if this unit is connected |
| |
| with an HDMI cable. | 12, 27 |
|
| ≥The |
| |
|
|
| |
| – If the device has an optical audio output terminal, connect the device to this unit’s |
|
|
| “OPTICAL 2(STB)” terminal. |
|
|
Humming is heard during play. | ≥An AC power supply cord or fluorescent light is near the main unit. Keep other appliances and | — |
|
| cables away from the main unit. |
|
|
|
|
|
|
No surround sound. | ≥Press [SURROUND] to select a surround effect. | 18 |
|
Cannot switch audio. | ≥There are discs for which audio cannot be changed because of how the disc was created. | — |
|
| ≥When audio is output from the HDMI AV OUT terminal, you cannot switch the audio if “Dolby | 38 |
|
| D/Dolby D +/Dolby TrueHD” or |
|
|
| Dolby TrueHD” or |
|
|
No sound from the TV | ≥Press | 17 |
|
Card |
|
|
|
The capacity of the SD card | ≥When a | 22 |
|
decreased. | be written to the SD card. Erase the data by using |
|
|
| use a new card. |
|
|
Music on an SD card cannot be | ≥Data that can be played from an SD card are AVCHD, MPEG2 and JPEG data. | 43 |
|
played. |
|
|
|
The contents of the card | ≥The card is not compatible or the contents on the card may be damaged. | 43 |
|
cannot be read. | ≥Turn off and then turn on the unit again. | — |
|
iPod operations |
|
|
|
Cannot charge or operate. | ≥Check that the iPod is connected firmly. | 30 |
|
| ≥The battery of the iPod is depleted. Charge the iPod, and then operate again. | — |
|
Cannot display iPod videos/ | ≥Make sure that TV is connected to the VIDEO OUT terminal on this unit. | 10 |
|
photos on the TV. | ≥Operate the iPod menu to make the appropriate video/photo output settings for your TV. | — |
|
| (Refer to operating instructions for your iPod.) |
|
|
The TV input channel | ≥When the main unit is connected with an “HDAVI Control” compatible TV and VIDEO IN is | — |
|
unintentionally changes to | selected for iPod video or photo playback, the TV input channel will automatically change to |
|
|
HDMI input. | the HDMI input channel when [START] is pressed. |
|
|
| – |
|
|
Radio |
|
|
|
Distorted sound or noise is | ≥Adjust the position of the FM or AM antenna. | — |
|
heard. “ST” flickers or does not | ≥Use an outdoor antenna. | 13 |
|
light. |
|
|
|
A beat sound is heard. | ≥Turn the TV off or move it away from the unit. | — |
|
A low hum is heard during AM | ≥Separate the antenna from other cables. | — |
|
broadcasts. |
|
|
|
Optional wireless system |
|
| |
No power. | ≥Ensure the AC power supply cord of the wireless system is connected properly. | — |
|
The indicator on the wireless | ≥Turn the wireless system off and then back on. | — |
|
system does not turn green |
|
|
|
even though [I/D SET] is |
|
|
|
pressed and pairing completed. |
|
|
|
The wireless link indicator | ≥There is no link between the main unit and the wireless system. Turn the wireless system off | — |
|
(e.g., “ [W1] ” or an indicator) is | and then back on. Alternatively, turn the wireless system off, disconnect the AC power supply |
|
|
flashing. | cord, and then reconnect it. |
|
|
The wireless link indicator | ≥Check that the main unit is turned on, and the wireless system is turned on. | — |
|
(e.g., “ [W1] ” or an indicator) | ≥Ensure that the digital transmitter is fully inserted into the slot of the main unit. | 45 |
|
does not light. | ≥Ensure the surround sound setting on the main unit. | — | Reference |
The wireless link indicator | ≥There is a power supply problem. Consult the dealer. | — | |
keeps flashing between red |
|
|
|
and green. |
|
|
|
RQT9508
49