Panasonic SC-BT303 Frequently asked questions, Messages, On the unit’s display continued, Setup

Models: SC-BT203 SC-BT303 SC-BT200

1 60
Download 60 pages 8.04 Kb
Page 52
Image 52
Messages

Messages

On the unit’s display (continued)

Page

[W1]” is flashing.

≥There is no link between this unit and the wireless system. Check that the wireless system

45

(when using the optional wireless

is plugged into the household AC outlet and is turned on.

45

accessory: SH-FX70)

≥Ensure that the digital transmitter is fully inserted into the slot of this unit.

 

≥If the wireless system is not used, disconnect the digital transmitter from this unit.

U59

≥The unit is hot.

 

The unit switches to standby for safety reasons. Wait for about 30 minutes until the

 

 

message disappears.

 

 

Select a position with good ventilation when installing the unit. Do not block the cooling fan

 

 

on the rear of the unit.

 

U72

≥The HDMI connection acts unusually.

U73

– The connected equipment is not HDMI compatible.

 

 

– Please use HDMI cables that have the HDMI logo (as shown on the cover).

 

 

– The HDMI cable is damaged.

 

Hor F

≥Check and correct the speaker cable connections.

9

(“ ” stands for a number.)

≥There is something unusual. (The service number displayed after H and F depends on the

 

unit’s condition.)

47 to 50

 

≥Check the unit using the troubleshooting guide. If the service number does not disappear,

 

do the following:

 

 

1 Disconnect the plug from the household AC outlet wait a few seconds, then reconnect

 

 

it.

 

 

2 Press [POWER Í/I] to turn the power on. (The unit may be fixed.)

 

 

If the service number does not disappear despite doing the above, request service from

 

 

the dealer. Inform the dealer of the service number when requesting service.

 

IPOD OVER CURRENT ERROR

≥The iPod is drawing too much power. Remove the iPod, and turn the unit off and on again.

 

 

 

START

≥The system is being restarted during the firmware update. Please do not turn off power.

32

 

 

 

UPD/

≥The firmware is being updated.

32

 

 

 

FINISH

≥The firmware update is complete.

32

NOT CONDITIONAL

≥The requested operation cannot be conducted.

 

 

 

llllllll

≥The main unit could not save the modified settings. Some settings may need to be reset.

 

 

 

Frequently asked questions

 

 

Setup

 

Page

 

Can I connect other speakers?

≥Speakers other than those supplied cannot be used. This system achieves ideal audio

 

 

properties through the combination of the main unit and the supplied speakers. Using

 

 

 

other speakers may damage the system and will not produce correct audio characteristics

 

 

 

(e.g., no bass sounds).

 

 

My TV has COMPONENT VIDEO IN

≥The different levels of picture quality input are listed below in order from highest to lowest.

 

terminals and HDMI IN terminal.

HDMI IN )COMPONENT VIDEO IN )VIDEO IN. However, it will take longer for the

 

 

Which should I connect with?

picture output to start up when this unit is connected with the HDMI IN terminal.

 

 

 

 

 

 

Disc

 

 

 

Can I play BD-Video and DVD-Video

≥You can play them if the video standard is NTSC; however you cannot play:

Cover

 

bought in another country?

BD-Video discs that do not include region “A”.

 

 

 

DVD-Video discs that do not include region “1” or “ALL”.

 

 

 

Refer to the disc’s jacket for more information.

 

 

Can BD-Video/DVD-Video that does

≥The region management information for BD-Video/DVD-Video indicates that the disc

 

not have a region code/number be

conforms to industry standards. You cannot play discs that do not conform to industry

 

 

played?

standards or do not have a region code or number.

 

 

Please tell me about disc compatibility

≥Refer to “Disc and card information” and “About MP3/JPEG files”.

42, 44

 

with this unit.

≥You cannot write to a disc with this unit.

 

SD card

 

 

 

What kinds of operations are available

≥The following operations are available.

 

on the SD card slot on this unit?

– Play back JPEG data recorded with a digital camera etc.

 

 

– Play back AVCHD motion pictures recorded with Panasonic High Definition Video

 

 

Camera

 

 

– Play back MPEG-2 motion pictures recorded with Panasonic Standard Definition Video

 

 

Camera

22

 

 

≥If a BD-Video disc supporting BD-Live or BONUSVIEW is used, it is possible to copy

Reference

 

secondary video, etc. from the Internet or disc to the card and play it back together with

 

 

the images on the disc, etc.

 

 

 

 

 

 

 

 

 

What kinds of cards can be used?

≥SD Memory Cards (from 8 MB to 2 GB), SDHC Memory Cards (from 4 GB to 32 GB),

43

 

 

miniSD Cards*, and microSD Cards* can be used.

 

 

 

* A miniSD Card and a microSD Card must be used in the adaptor included with the

 

 

 

memory card.

 

 

 

Please confirm the latest information on the following website.

 

 

 

http://panasonic.co.jp/pavc/global/cs

 

 

 

(This site is in English only.)

 

RQT9508

52

Page 52
Image 52
Panasonic SC-BT303 Frequently asked questions, Messages, On the unit’s display continued, Setup, SD card, Page, Disc