Getting started

Positioning

Caution

≥The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has

occurred or if you experience a sudden change in performance.

≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.

How you set up your speakers can affect the bass and the sound field.

≥Place speakers on flat secure bases.

≥Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains. ≥For optional wall mount, refer to page 46.

NOTE Keep your speakers at least 10 mm (13/32q) away from the system for proper ventilation.

Setup example

Place the front, center, surround and surround back speakers at approximately the same distance from the seating position. Using “SMART SETUP” (> 15) is a convenient way to get the ideal surround sound from your speakers when you are unable to place them. The angles in the diagram are approximate.

Center speaker

Put on a rack or shelf. Vibration caused by the speaker can disrupt the picture if it is placed directly on the TV.

Main unit

To allow for proper ventilation and to maintain good airflow around the main unit, position it with at least 5 cm (2) of space on all sides.

Front

Subwoofer

speakers

 

e.g., [BT300]

45º to 60º

[BT303]

 

Place to the right or left of the TV, on the floor or a sturdy shelf so that it will not cause vibration. Leave about 30 cm (1113/16) from the TV.

Surround back

 

Surround speakers*

 

speakers*

 

 

 

 

 

Position the speakers

 

Position the speakers as

 

as illustrated and

 

illustrated and place them

60º to 90º

place them about

160º to 170º

about 1 m (3 ft) higher

1 m (3 ft) higher than

than ear level.

 

ear level.

 

* It is recommended to place all the surround and surround back speakers at approximately the same height.

NOTE

RQT9508

Connection with a wireless system Optional Panasonic wireless accessory SH-FX70

It is also possible to connect the Surround and Surround back speakers with 2 sets of the optional Panasonic wireless system SH-FX70. (> 45)

≥Use only supplied speakers

Using other speakers can damage the unit, and sound quality will be negatively affected.

≥You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.

≥Reduce the volume in the following cases to avoid damage:

When playing distorted sound.

When the speakers are reverberating due to a record player, noise from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument.

When adjusting the sound quality.

When turning the unit on or off.

≥Positioning speakers in front

It is possible to locate all the speakers in front of the listening position. However the optimal surround

If irregular coloring occurs on your TV

The center speaker is designed to be used close to a TV, but the picture may be affected with some TVs and setup combinations.

If this occurs, turn the TV off for about 30 minutes.

The demagnetizing function of the TV should correct the problem. If it persists, move the speakers further away from the TV.

Caution

Do not touch the front netted area of the speakers. Hold by the sides. e.g., Center speaker

DO DO

NOT

8

TIPS

sound effect may not be obtainable.

Page 8
Image 8
Panasonic SC-BT203, SC-BT200, SC-BT303 Positioning, Setup example, If irregular coloring occurs on your TV, Do do Not Tips