Panasonic SC-BT303, SC-BT200 Assembling the speakers, Preparation, Speaker assembly option, Not

Assembling the speakers

[BT300] \BT303\ : Front speakers

Preparation

≥To prevent damage or scratches, lay down a soft cloth and perform	≥For assembly, use a Phillips-head screwdriver (not included).
assembly on it.	≥For optional wall mount, refer to page 46.

Make sure you have all the indicated components before starting assembly, setup, and connection.

Keep the screws out of reach of children to prevent swallowing.

2 Front speakers	2 Stands	2 Bases	8 Screws
	(with cables)

1

	Slide into the groove.
	Tighten securely.	2
2
	Insert the wire fully.
	: White
	: Blue
Position the cable	Push!	1
between the ridges.	Press into the groove.

Tighten securely.

Leave about 120 mm (423/32)

Getting started

Speaker assembly option

Thread the speaker cable		Attach the speaker.
through the base.			Insert the wire fully.
Leave about 120 mm (423/	32	)	: White
			: Blue	Push!

You can remove and use the cable from the stand. To reattach the cable, refer to page 46.

Press into the groove. Tighten securely.

Slide into the groove.

Do	≥Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the
	speakers.
Not
NOTE

Preventing the front speakers from falling

≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

e.g.

String (not included)

Thread from the wall to the speaker and tie tightly.

Caution

≥Do not stand on the base. Be cautious when children are near. e.g.

			DO
		Approx.	NOT
Screw eye	Wall	150 mm
(not included)		(529/32)
Rear of the speaker			RQT9508

7