Sunrise Medical 93000 A s s e m b l y o f 3 - P o s t S y s t e m, EASYTRACK 3-POSTSYSTEM

6

A s s e m b l y o f 3 - P o s t S y s t e m

EASYTRACK 3-POST SYSTEM

KIT CONTENTS & PART NUMBERS (Figure 6)

Description		Part #	Qty
1	Pivoting extendable
	rail w/standard trolley	900-0850	1
2	Extendable rail
	w/swivel trolley	900-0800	1
3	Pivot post	??	1
4	Post top for pivot post	N/A	4
5	Standard post	900-0500	2
6	Blue locking handle	N/A	3
7	Round blue cap	900-0720	3
8	Allen key	900-3280	1
9	Clip-on level	900-0600	1
10	Top plate	900-0400	3
11	Round foot plate	900-0350	3
12	Blue plastic strips
	(2/post)	900-0230	6
13	Flat blue cap	900-1050	1
14	C-H protector	900-0780	1
15	Swivel trolley	900-0900	1
16	Standard trolley	900-0650	1
	Set screw for rail
	stopper (not shown)	900-4580

ASSEMBLY OF 3-POST SYSTEM

Tools Required:

•Step ladder

•Tape measure

•An assistant

1.Decide where you will place your pivot post and the other two stan- dard posts. There must be a minimum of 75" (1.90 m) of space between each of the standard posts and a minimum of 21.3"-55.1" (540- 1400mm) between the standard posts and the nearest wall (Figure 3).

NOTE– Posts are not the same - see Figure 6 for more details.

2.Remove the round blue plastic caps from the top of each post by pulling them away from the post (Figure 7).

3.Remove the blue plastic strips from each side of the posts. Take one end and pull gently (Figure 8).

4.Place one round foot plate on the floor where you want to place the pivot post of the Easytrack System.

1	2	3	4
16

5

15

6

14

7

8

13

9

12

10

11

Figure 6

Figure 7 Figure 8

3-Post System