Panasonic SC-BT203, SC-BT200, SC-BT303 warranty Changing the unit’s settings, Display, Dts/Dts-Hd

Changing the unit’s settings

To select these settings, perform steps 1 to 5 (> 37)

“Audio”

	Dynamic Range Compression [BD-V] [AVCHD] [DVD-V]			≥On	≥Off
	(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)			≥Auto:	Effective only when Dolby TrueHD is played.
	Change the dynamic range (> 54) for late night viewing.
	Digital Audio Output
	≥Press [OK] to show the following settings.
		Dolby D/Dolby D +/	Select whether Dolby Digital, Dolby	≥Bitstream:	Select “Bitstream” when the connected equipment can
		Dolby TrueHD	Digital Plus, Dolby TrueHD, DTS Digital		decode the respective audio format.
			Surround, DTS-HD High Resolution		– Connect equipment supporting HDMI (High Bit rate
		DTS/DTS-HD	Audio or DTS-HD Master Audio is		Audio) and use a High Speed HDMI Cable in order to
			output in “Bitstream” or “PCM” format.		output high bit rate audio such as Dolby Digital Plus,
					Dolby TrueHD, DTS-HD High Resolution Audio or
			≥Not making the proper settings
					DTS-HD Master Audio.
			may result in noise.
				≥PCM:	Select “PCM” when the connected equipment cannot
			≥If the unit is connected with the
					decode the respective audio format.
			HDMI AV OUT terminal, the
			specifications of the connected	Refer to the operating instructions for connected devices to verify whether
			equipment take preference over	or not they can decode each of the audio formats.
			this unit and audio selected in these
			items may not be output (e.g., when
			a TV is connected, the HDMI audio
			output of this unit is limited to
			down-mixed 2ch).
		BD-Video Secondary Audio [BD-V]		≥On:	The primary audio and secondary audio are mixed and
		Turn on/off the clicking sound on the menu and audio with			output. The sampling frequency is converted to 48 kHz.
		secondary video in picture-in-picture mode. (> 22)		≥Off:	The clicking sound on the menu and secondary audio
					are not output.
	PCM Down Conversion			≥On:	Signals are converted to 48 kHz. (Choose when the
	Select how to output audio with a sampling frequency of 96 kHz				connected equipment cannot process signals with
	or more.			≥Off:	sampling frequency of 96 kHz.)
	≥Signals are converted to 48 kHz despite the settings across in				Signals are output as 96 kHz. (Choose when the
		the following cases:			connected equipment can process signals with
					sampling frequency of 96 kHz.)
		– when the signals have a sampling frequency of over 192 kHz
		– when the disc has copy protection
		– when “BD-Video Secondary Audio” is set to “On”
	Downmix			≥Stereo:	When connected to equipment that does not support
	Switch the downmix system for playing back multi-channel				the virtual surround function.
	surround sound.			≥Surround encoded:
	≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set				When connected to equipment that support the
					conversion from 2 channels to multi channel surround.
		to “Bitstream”, there are no downmix effects for the outputted audio.
	≥The audio will be outputted in “Stereo” in the following cases.
		– AVCHD playback
		– Playback of clicking sound on the menu and audio with
		secondary video in picture-in-picture mode
	High Clarity Sound			≥Enable	≥Disable
operations	When the analog video terminal is not being used, the electrical
	current that flows through the analog video circuit can be
		source.
	stopped. This prevents adverse effects on the audio signals and
	produces clearer sound.
	≥This works only when “BD/DVD” or “SD” is selected as the
Advanced	≥Set to “Enable” and then set “High Clarity Sound” in the
		terminal or VIDEO OUT terminal.
		on-screen menu to “On”. (> 36)
	≥Use this when outputting image via HDMI AV OUT terminal.
		Analog image will not be output via COMPONENT VIDEO OUT
	Speaker			Refer to page 41
	“Display”
	Status Messages			≥Automatic	≥Off
	Choose whether to show status messages automatically.
	On-screen Language			≥English	≥Français	≥Español
	Choose the language for these menus and on-screen messages.
	Screen Saver Function			≥On:
	This is to prevent burn-in on the screen.			If there is no operation for 5 minutes or more, the displayed screen
	≥When this is set to “On”, the masked-off area on the screen			switches to the other states automatically.
		becomes gray.		– When the Direct Navigator or START menu is displayed, the display
		[Only when connecting with an HDMI cable or a component		returns to the screen saver mode.
		video cable and “HDMI Resolution” (> 39) is set to any other		– When CD or MP3 is played, the display returns to the screen saver
		mode than “480p”, or “Component Video Resolution” (> 39) is		mode. (Playback continues.)
		set to “720p” or “1080i”]		– When still pictures are shown (except for slideshow), the display returns
				to the Direct Navigator screen.
				≥Off:
	FL Display			≥Bright
	Changes the brightness of the unit’s display.			≥Dim:	The display is dimmed.
	– The brightness of the volume indicator (> 6) is also changed.			≥Auto:	The display is dimmed, but brightens when you
					perform some operations.
RQT9508	License			Information about the software used by this unit is displayed.
38