Sears 45521 Removable Knobs, Removable Cooktop Units, Molded RIB Pring CUP Clear Groove Stem

Page 18

REMOVABLE KNOBS

All control knobs may be removed for easy cleaning by pulling the knob straight off the stem. Be sure that the knob is In the OFF position before removal.

Hint: Slip a thin cloth (such as a handkerchief) ora piece of string under and around the knob edge and pull up.

Caution: Read these instructions

carefully before replacing the knobs. Replacing the knobs improp. erly will damage the knobs and the spring clip on the stems. If this happens, the knobs will fit loosely.

To replace the knob:

1.The knob stem has a groove In each side. The groove on one side has a spring clip. The other groove Is clear (see illustration).

2.Check the inside of the knob and find the molded rib,

3.Replace the knob by fitting the molded rib Inside the knob into the clear groove on the stem.

MOLDED

RIB

PRING

CUP

CLEAR GROOVE

IN STEM

Note: Be sure to replace knobs on correct

stems from which they came.

REMOVABLE COOKTOP UNITS

The cooktop elements can be unplugged and the bowls removed for cleaning.

Be sure all cooktop unit control knobs are turned

IMPORTANT: Never operate a cooktop element

without the bowl in place. This can cause

scorching of the cooktop, burning of wiring insulation and loss of energy.

off and elements are cool before you remove or replace a cooktop unit,

To remove:

1.

Grasp element, tilt It upward slightly to clear the

 

bowl, then pull away from the receptacle. The element

 

will not sit level when replaced If it Is forced too far

 

upward when removed.

2.

For models with porcelain enameled reflector bowls,

 

remove the chrome trim ring.

ELEMENTS

REFLECTOR BOWl.

RECEPTACLE

3. Lift out the bowl.

Do not put the element Into water. It cleans itself when heated during normal use,

To replace:

1.Replace the bowl. Be sure the receptacle Is showing in the bowl opening.

2.For models with porcelain enameled reflector bowls, replace chrome trim ring,

3.Slide the plug of the element firmlyinto the receptacle and lower the element into place.

CAUTION: Do not pull element up more than 1/2" or damage to the receptacle will occur.

17

NEMNT37

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Sears Iiiiiiiiiiiiiiiiiiiliil NESAF09-2 Safety Instructions Is essentialOven Fire Important Safety InstructionsImportant Safety Notice Cooktop Grease FireYour Range To SET the Clock To Reset Broil To Reset the TimerTo Cancel the Timer To SET BroilCode DisplayTones Increase or Decrease To SET Stop TimeCooktop Cooking Cooktop ControlObserve Following Points in Canning Questions & AnswersHome Canning Tips RightwrongOven Cooking ShouldBroiling Broiling TipsPositioning Broiler PAN Before a Clean Cycle After a Clean CycleWhen a Clean Cycle is Finished To SET SELF-CLEAN CycleTo Interrupt a Clean Cycle To SET Delayed SELF-CLEAN CycleCleaning Tips Cleaning MaterialsRemarks Removable Oven Door Removable Oven RacksRemovable Knobs Removable Cooktop UnitsMolded RIB Pring CUP Clear Groove Stem LIFT-UP Cooktop Replacing the Oven LightGlass Cover Dont Call for Service Until YOU Check Before Calling for ServiceProblem Possible CauseBefore Calling for Service Dont Call for Service ProblemPress SET Between Adjusting Oven TemperaturePreset Oven Display SET Between -35FAND +35F Immediately Press HoldPage Ken Ore
Related manuals
Manual 24 pages 28.4 Kb

45520, 45521 specifications

Sears models 45521 and 45520 are notable entries within the catalog of tools and equipment that target both enthusiasts and professional tradespeople alike. These models have garnered attention for their blend of practicality, durability, and innovative features.

The Sears 45521 is designed with a focus on precision and versatility. One of its standout features is the adjustable speed settings, allowing users to tailor the performance to suit different applications. Whether it is for drilling, sanding, or cutting, this model provides the flexibility needed to tackle a variety of tasks.

On the other hand, the Sears 45520 emphasizes its powerful motor, which enables it to handle more demanding tasks with ease. The robust construction of this tool not only promises longevity but also reduces the risk of wear and tear over time. The ergonomic design ensures user comfort, reducing fatigue during extended use.

Both models are equipped with advanced safety features that protect users while they work. These include protective guards and overload protection, which help prevent accidents and ensure reliable operation.

In terms of technology, Sears has integrated some modern advancements into the 45521 and 45520 models. For example, both feature an easy-to-read digital display that provides real-time feedback on performance metrics, including speed and power usage. This level of precision allows users to make informed adjustments and optimize their workflow.

Another characteristic shared by these models is their compatibility with a wide range of accessories. This includes drill bits, blades, and sanding attachments, making them highly adaptable tools that can meet various project needs. Furthermore, both models come with comprehensive user manuals, providing detailed guidance on setup, operation, and maintenance, which enhances their usability for individuals at all skill levels.

In summary, the Sears 45521 and 45520 models offer a combination of versatility, power, and safety, making them excellent choices for DIY enthusiasts and professionals alike. With their advanced features and robust design, they stand as reliable tools that can handle a diverse array of tasks in various settings.
Top Page Image Contents