Checking Food Temperature
FREEZER: Place the thermometer in
the center of the freezer, surrounded by frozen packages Wait 5 to 8 hours, then check the reading. If temperature is not within 0° to +2 ° F,adjust control
as needed, one position at a time and check temperature again after 4 to
6 hours See Figure 21
REFRIGERATOR: Place the thermom- eter in a glass of water and place the glass in the middle of the refrigerator section° Be sure air can flow around it. Wait 3 to 4 hours, check the tempera- ture and adjust the control as needed
Power Miser Control
The
The upper position is for periods of
high humidity,
RefrigeratorFea±ures
Adjustable Cantilever Glass Shelves. These shelves attach to metal tracks in
the back of the interior. To remove, tap upwards at rear of shelf hooks Lift shelf and putl out. To install, tilt shelf and engage upper hooks in desired track slots. Lower shelf front and tap down- wards near the tracksuntil shelf hooks are securely seated and shelf is level.
one position at a time to achieve the 38 ° to 40 ° F range_Wait 3 to 4 hours and check the temperature again. See Rgure 22,
t;
-FROZEN FOOD PACKAGSS
FIGURE 21 | GLA._S OF WATE_ |
FIGURE 22
The lower position is for maximum energy savings. Use for periods of low humidity. A minimum amount of con- densation is normal° During extreme high humidity, condensate may also form on the cabinet sides and doors This is normal
and will disap- | POWER MISER | |
pear when cli- |
| |
matic condi- |
| |
tions return to | REDUCES | |
MOISTURE | ||
normal | ||
|
SAVES
ENERGY
CAUTION:
To Avoid Personal Injury Or Prop- erty Damage test for proper instal- lation by exerting some pressure
downward on the frontedge,. Shelf should not move,
18