Door AssemblIy Removal
To Remove The Door'
Assemblies (Do NOT remove
the door handles)
Tools Needed; Phil{ips Screwdriver and a 51,_Nut Driver
WARNING
(3)SCREWS SECURE EACH
t[TOP HINGE
TO AVOID THE RISK OF PERSONAL INJURY OR DEATH DISCONNECT THE POWER CORD BEFORE PROCEEDING.
1_Remove the toe grille.
2.Open refrigerator door'to gain access to door closure screw, See
Figure 6A,
3Unscrew bottom refrigerator door
closure screw with a Phillips Screwdriver, See Figure 6A.
FIGURE 6A
BOTTOM OF
REFR}GERATOR DOOR
4.Disconnect wire harness at connector, Push lock tab on underside of connector up and then pull loose. See Figure 7.
FIGURE 7
,,
CAUTION
FIGURI
6,,Remove the top hinge covers, See Figure 9.
F_GURB 8
USE A PHILUPS SCREWDR}VE
REMOVE THE TOP HINGE COY
SCREW I
DRIVER
CAUTION:
The Power
Ce_d must nut be connected
TOP
COVER
FREEZER DOOR TOP
HINGE IS SHOWN
FIGURE 9
7.Disconnect top hinge freezer door wires. See Figure 10..
DISCONNECT THE TOP HINGE WIRES
POWERCORDMUST B:
_k WARNINGTHE
DISCONNECTED.
PH]LUPS
SCREW DRIVER
PH{LL}_$ ECRU.
GROUND WiRE
To Avoid the Risk Of Personal
Injury Or Property Damage tape the top of the doors as
shown in Figure&
4