GB
o Sorting the Channel List
Use the following 3 different color buttons to sort the channel list:
zRed button (Normal): Displays the list in order of search result.
zGreen button (Sort by Alphabet): Sorts the list alphabetical order.
zYellow button (Sort by F/S): Sorts the list by FTA and Scrambled.
NOTE:
zTo check the radio channels list, press the Radio button.
zTo check the favorite channels list, press the Fav button.
3.2.6Subtitle/Teletext
The STB is capable of receiving closed caption and Teletext.
Subtitle
1Press the Subt. button on the remote control. The Subtitles screen will appear.
2At the Subtitles On/Off setting (above), use the Left/Right buttons to select On or Off.
3Use the CH Up/Down buttons to select the Subtitle Language setting (below) and use the Left/Right buttons to select a language. The supported languages vary from channel to channel.
4To exit the Subtitles screen, press the Exit/Subtitle buttons on the remote control.
Teletext
Press the Teletext button on the remote control. Teletext information such as news, weather, sports scores etc. will be displayed on the screen. If current channel has teletext otherwise it will show "No Teletext Available" message.
NOTE:
zHowever, this unit allows you to view Teletext information even if your TV does not support the function.
zUse the up and down keys to select previous and next pages.
zUse the AUDIO key to select previous selected pages(100).
zUse the TIMER key to select the index page (100).
zUse the Last key to zoom the teletext page.
zTo change the background color of the teletext page to "transparent", use the INFO button.
3.3Basic Configuration
Set the basic configuration for the unit. In general, if you purchased the STB from your local vendor, the settings will already be set up as appropriate for your locale.
3.3.1 OSD Setup
Set the
1Press the Menu button on the remote control. The Main Menu screen will appear.
2Use the CH Up/Down buttons on the main unit/remote control to select the System Setup menu, and then press the OK button.
3Use the CH Up/Down buttons on the main unit/remote control to select "2. OSD Setup", and then press the OK button.