GB
3.2Using Other Functions
3.2.1 Controlling the Volume
Volume Control
Use the Vol Up/Down buttons on the remote control to control the volume. When the volume control display appears, you can also use the Left/Right buttons to adjust the volume. After the volume is adjusted, the volume control display will automatically disappear.
Muting
Press the Mute button on the remote control to turn off the sound temporarily. Press the Mute button again to restore the sound.
3.2.2 Audio Setup
Audio Setup is divided into Audio Language setting and Audio Mode setting.
1Press the Audio button on the remote control.
2At the Audio Language setting (above), use the Left/Right buttons to select one of the languages offered by the relevant channel.
3Use the CH Up/Down buttons to select the Audio Mode setting (below).
4Use the Left/Right buttons to select the desired audio mode. The available modes are as follows:
zStereo: The sound comes from both speakers.
zMono(L): The sound comes from the left speaker only.
zMono(R): The sound comes from the right speaker only.
z
5 To return to normal screen, press the Exit / Audio button on the remote control.
3.2.3 Listening to the Radio
The STB also allows you to listen to radio stations.
1To listen to the radio, press the Radio button on the remote control.
2When the Channel List screen appears, use the Radio button to select the TV/radio channel and then press the OK button.
Use the Numeric buttons to select the desired radio channel. Alternatively, use the CH Up/Down buttons to select a radio channel, and then press the OK button.