Troubleshooting
NOTE
zDigital communication involve the simultaneous transfer and processing of large amounts data.
zChanging channels may take longer than for analogue devices.
| Problem |
| Solution |
1) | No Video | - | Channel Data changed. |
|
| - Execute Manual/Auto Channel Search (Please refer to the Manual for details). | |
2) | No Audio | - Check the audio mute controls | |
|
| - Check Audio Language; Press Audio Key and try to change the language | |
|
|
| or change Main Audio language in OSD Setup. |
3) | Receiver fails to boot. | - Turn the unit off and then on again | |
|
| - Contact the A/S Center if this problem occurs repeatedly. | |
4) | Search channel fails | - Check the signal line connection | |
5) Screen shows No Signal | - Check the signal line connection | ||
| continuously |
|
|
6) | Video Freeze | - Bad Signal stream or bad channel; move to another channel - | |
|
|
| power. |
7) | Remote control does not | - Receiver may be affected by noise from other home appliances. Move the | |
| respond |
| receiver to a different location. |
|
| - Check if the battery of Remote Control is working. | |
8) | No OSD MENU | - Check SCART, ensure it is connected to your receiver and TV correctly | |
9) | Fails to Download via Serial | - | |
| Port |
|
|
GB
Specifications
Tuner
RF Input Frequency | 51 ~ 858MHz |
RF Loop through output | 51 ~ 858MHz |
RF Input Impeadance | 75 ohm |
Input Signal Level | |
Constellation | 16,32,64,128,and 256 QAM |
Front-End Demodulator
Demodulation Capacity | QAM Demodulation |
Symbol Rate | 1.725~6.952 MS/s |
Viterbi Decoding Rate | 1/2 , 2/3 , 3/4 , 5/6 , 7/8 |
Reed Solomon Decoding | FEC : 204 , 188 t =8 |
Transport Demultiplexer
Demultiplex | According to ISO/IEC |
Max. Input Stream | 60MHz(Serial)/7.5MHz(Parallel) |
PID Handling Capability | 32 PID |
SI Filtering | According to |
Video Decoding Parameters
Video Decoding | ISO/IEC |
Aspect Ratio | 4:3, 16:9 |
Resolution | MAX. 720 X 576 |