Tsunami MP.11 Antenna Installation |
|
Contents |
|
ABOUT THIS BOOK | 4 |
Who Should Use This Guide | 4 |
Finding Additional Information | 5 |
About the Tsunami MP.11 Product Family | 6 |
Safety Precautions | 7 |
CHAPTER 1. PREPARING FOR INSTALLATION | 8 |
Installation Process Overview | 8 |
Site Prerequisites | 9 |
Indoor Link Installation | 9 |
Tsunami MP.11a Model 5054 Hardware | 9 |
Model 5054 Cable Setup for an Outdoor Antenna | 10 |
Model | 11 |
Models | 11 |
Outdoor Hardware Placement | 12 |
Cable System | 13 |
Surge Arrestor Placement | 13 |
Antenna Cable Route | 13 |
Outdoor Link Installation | 14 |
Placing the Antenna | 14 |
Mounting the Antenna | 17 |
Connecting the Antenna Cable | 18 |
Sealing the Cable Connectors | 18 |
Grounding the Antenna | 19 |
Aligning the Antenna | 19 |
Before Climbing the Roof | 22 |
CHAPTER 2. DETERMINING RANGE AND CLEARANCE | 23 |
Determining the Outdoor Range | 23 |
Maximum Range | 24 |
Clearance Factor | 24 |
Distance Assumptions and Expectations | 26 |
Model 5054 | 26 |
Model | 27 |
Model | 27 |
Calculations | 28 |
Calculating Received Signal Level and Link Budget | 28 |
CHAPTER 3. ANTENNA CABLING SYSTEM | 32 |
Introduction | 32 |
Cable Components | 32 |
Selecting the Correct Connector Type | 33 |
Surge Arrestor | 34 |
Installation | Error! Bookmark not defined. |
SUPPORT AND WARRANTY | 36 |
Warranty and Repair | 37 |
Copyright © 2006 Proxim Wireless Corporation. All rights reserved. | 3 |