Sterling A0554831 manual Select Fahrenheit or Celsius, Stage 1 Freeze Protection

Page 37

Perform the following procedures to program the electronic High/Low Thermostat control:

Select Fahrenheit or Celsius

1.Press the Set key once to access Fahrenheit/Celsius mode. Factory set to F.

Use the Up Arrow and Down Arrow keys to toggle between Fahrenheit and Celsius.

Stage 1: Freeze Protection

2.Press the Set key again to access the low temperature set point. The screen displays the current set point and the S1 indicator blinks on and off to indicate that the control is in set point mode.

Use the Up Arrow and Down Arrow keys to adjust the set point. At 50ºF (10ºC) leaving water temperature, the setting should be 42ºF (6ºC).

3.Press the Set key again to access the Stage 1 differential. The screen displays the current differential and the DIF1 indicator blinks on and off to indicate that the control is in differential mode.

Use the Up Arrow and Down Arrow keys to adjust the differential. The setting should be 12ºF (-11°C).

4.Press the Set key again to access Stage 1 cooling or heating mode. The screen displays the current mode: C1 for cooling or H1 for Heating.

Use the Up Arrow and Down Arrow keys to toggle between C1 or H1. The setting should be C1.

Stage 2: High Temperature Protection

5.Press the Set key again to access the high temperature set point. The screen displays the current set point and the S2 indicator blinks on and off to indicate that the control is in set point mode.

Use the Up Arrow and Down Arrow keys to adjust the set point. The setting should be 100ºF (38ºC).

6.Press the Set key again to access the Stage 2 differential. The screen displays the current differential and the DIF2 indicator blinks on and off to indicate that the control is in differential mode.

Use the Up Arrow and Down Arrow keys to adjust the differential. The setting should be 2ºF (-17°C).

7.Press the Set key again to access Stage 2 cooling or heating mode. The screen displays the current mode: C2 for cooling or H2 for Heating.

Use the Up Arrow and Down Arrow keys to toggle between C2 and H2. The setting should be H2.

2-40 HP Portable Chillers

Chapter 4: Operation

37 of 70

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Hp Portable Chillers Shipping Information Table of Contents Operation HP Portable Chillers How to Use This Manual SafetySafety Symbols Used in this Manual Responsibility Wear Safety Glasses and Work GlovesModels Covered in This Manual Functional DescriptionChilled Water Circuit General DescriptionRefrigeration Circuit Mechanical Features Standard FeaturesOther Mechanical Features Refrigeration Features Electrical FeaturesController Features Other FeaturesHigh/Low Thermostat Control Safety Devices and InterlocksCrankcase Heater High Pressure CutoutPressure Switch Fan Cycling SwitchFlow Switch Low Pressure CutoutOptional Features Mounting Features Optional Pump Amperages Voltage Construction Full Load Amps Uncrating InstallationElectrical Connections Bypass Valve Considerations Process Water ConnectionsGalvanic Corrosion Considerations Water Treatment ConsiderationsWater-Cooled Chiller Condensers Condenser ConsiderationsAir-Cooled Chiller Condensers Remote Air-Cooled Chiller Condensers Page Equivalent Length in Feet for Valves and Fittings Refrigerant Charge Determination Chiller Condenser Charge Field Installed Piping ChargeChecking Motor Direction Three-Phase CompressorsWater Pumps Condenser FanPart Number Description Water ReservoirEthylene Glycol and Propylene Glycol Curves Automatic Water Make-Up Option Initial Start-Up E5CK Controller Indicator Name Description Panel Buttons, Indicator Lights, and SwitchesOperation Microprocessor ControllersSterlco 2000 Controller Indicator Name Description Indicator Name DescriptionE5CK Graphic Panel See Figure Indicator Name DescriptionIndicator Name Description Eurotherm 3216 Controller Typical Graphic Panels With E5CK ControllerAuto-Tuning Setting the Process Water TemperaturesStart-up Optional CommunicationsProgramming the Electronic High/Low Thermostat Thermostat Buttons Indicator Name DescriptionSelect Fahrenheit or Celsius Stage 2 High Temperature ProtectionStage 1 Freeze Protection Filter Cleaning MaintenanceLubrication Maintaining the Evaporator Maintaining the CondenserEvaporator Process Piping Y-Strainer Air- and Remote Air-Cooled ChillersPreventative Maintenance Service HP Portable Chillers Troubleshooting TroubleshootingHP Portable Chillers Troubleshooting Appendix Warranty ReturnsReturned Material Policy Credit ReturnsTechnical Assistance Service DepartmentParts Department Sales DepartmentHp and 3 1/2 hp Air-Cooled Portable Chillers Drawings and SpecificationsHp and 7.5 hp Air-Cooled Portable Chillers Hp and 15 hp Air-Cooled Portable Chillers 20 hp, 25 hp, and 30 hp Air-Cooled Portable Chillers Nominal Condenser water Nominal cooling Water Com Hp and 3.5 hp Water-Cooled Portable ChillersIn. NPT Height Width Depth Lbs 28.3 22.0 41.7 28.3 22.0 41.7Hp and 7.5 hp Water-Cooled Portable Chillers Hp and 15 hp Water-Cooled Portable Chillers 20 hp, 25 hp, and 30 hp Water-Cooled Portable Chillers 39.5 39.1 98.4 Hp Water-Cooled Portable Chillers81.9 63.1 85.0 66.2 Hp and 7.5 hp Remote Air-Cooled Portable Chillers Nominal cooling Com Hp and 15 hp Remote Air-Cooled Portable ChillersIn. dia. ODS Pump Pumps Discharge Liquid Rated Running 15.0 40.9 34.0 74.7Nominal cooling Com Refrigeration Hp through 40 hp Remote Air-Cooled Portable ChillersPres Nom Connections To/from No tank Tank, to/from Height Width Depth Lbs‘A’in ‘B’in ‘C’in ‘D’in ODSin Remote Condenser Assembly ModelsHertz Pump Curves Pump Curves, Flow, and Pressure ConsiderationsDWG. No. S0554823 Calculating Chiller Nominal Flow and Pressure to Process Evaporator Water Pressure Drop TablesRecirc. power Flow Rate Pressure Gpm Lpm Psi KPa Recirculation Pump SpecificationsEvaporator Flow and Pressure Considerations Remote Air-Cooled Chiller Configurations Typical Ductwork for Air-Cooled Chillers Central and Gravity Return Piping with Standpipe Diagram Piping DiagramsTypical Piping Schematic, 2 and 3 1/2 hp Models HP Portable Chillers Appendix HP Portable Chillers Appendix Typical Piping Schematic, 5 hp through 40 hp, No-Pump Models HP Portable Chillers Appendix Typical Electrical Subpanel Electrical Schematics

A0554831 specifications

The Sterling A0554831 is a versatile and powerful tool designed for a range of applications, particularly in the industrial and construction sectors. Known for its robust construction and reliability, it has gained popularity among professionals and DIY enthusiasts alike.

One of the main features of the Sterling A0554831 is its durable build quality, which is designed to withstand harsh working conditions. The device typically features a high-strength casing that protects it from dust, moisture, and impact, ensuring longevity even in the most demanding environments. Its ergonomic design allows for comfortable handling, minimizing user fatigue during extended use.

In terms of performance, the Sterling A0554831 is equipped with advanced technologies that enhance its efficiency and functionality. The device is powered by a high-torque motor, delivering impressive power that enables it to tackle heavy-duty tasks with ease. The precision-engineered components ensure consistent performance, making it ideal for tasks that require accuracy and reliability.

Another significant characteristic of the Sterling A0554831 is its versatility. It typically comes with multiple settings and modes, allowing users to adjust the tool according to the specific requirements of their project. Whether drilling, cutting, or fastening, the tool can accommodate various tasks, making it a valuable addition to any toolkit.

Safety features are also a priority with the Sterling A0554831. Many models are equipped with overload protection and safety switches that prevent accidental activation, safeguarding the user during operation. Additionally, some variants may include LED indicators that provide real-time information about battery life or operational status, enhancing overall user experience.

In conclusion, the Sterling A0554831 stands out in the market for its combination of durability, performance, and versatility. With advanced technologies that cater to a wide range of applications and a design focused on user comfort and safety, this tool is an excellent choice for professionals looking for dependable and effective solutions in their work. Whether you are a seasoned professional or a casual DIYer, the Sterling A0554831 is well-equipped to handle your needs with ease and efficiency.
Top Page Image Contents