Pentair PLDE36, PLDE48 owner manual Table of Contents

Page 2

Table of Contents

 

Safety Instructions

2

General Information

3

Specifications

4

Installation

5

Initial Startup

5-6

Filter Disassembly / Assembly

6-7

Module Cleaning Procedure

8

Special Cleaning Instructions

8

System Inspection/Winterizing

9

Repair Parts List

10

Troubleshooting Guide

11

Warranty

12

Hazardous

Pressure!

Can cause tank explosion.

Do not connect filter to compressed air under any circumstances.

READ AND FOLLOW SAFETY INSTRUCTIONS!

This is the safety alert symbol. When you see this symbol on your filter or in this manual, look for one

of the following signal words and be alert to the potential for personal injury.

warns about hazards that will cause death, se- rious personal injury, or major property damage if ignored.

warns about hazards that can cause death, se- rious personal injury, or major property damage if ignored.

warns about hazards that will or can cause minor personal injury or property damage if ignored.

NOTICE indicates special instructions not related to hazards.

Carefully read and follow all safety instructions in this manual and on equipment. Keep safety labels in good condition; replace if missing or damaged.

Incorrectly installed or tested equipment may fail, causing severe injury or property

damage. Read and follow instructions in owner's manual when installing and oper-

ating equipment. Have a trained pool professional per- form all pressure tests.

1.Do not connect system to a city water system or other external source of pressurized water.

2.Use equipment only in a pool or spa installation.

3.Trapped air in system can cause explosion. BE SURE all air is out of system before operating or testing equipment.

Before pressure testing, make the following safety checks:

Check all clamps, bolts, lids, lock rings and system ac- cessories before testing.

Release all air in system before testing.

Tighten Sta-Rite pump trap lids to 30 ft. lbs. (4.1 kg-cm) torque for testing.

Water pressure for test must be less than 25 PSI (172 kPa).

Water Temperature for test must be less than 100o F.

(38o C).

Limit test to 24 hours. After test, visually check system to be sure it is ready for operation. Remove pump trap lid and retighten hand tight only.

NOTICE: These parameters apply to Sta-Rite equipment only. For non-Sta-Rite equipment, consult equipment manufacturer.

2

Image 2
Contents System 2TM Modular DE Filter Table of Contents Owner’s Information When to Clean the FilterGeneral Information Filter Specifications SpecificationsBackwash Mode Normal OperationInitial START-UP InstallationFilter Assembly Filter mount must ValvesFilter Backwash Procedure Cleaning the FilterWhen to Clean DisassemblySafety Latch See Figure AssemblyModule Cleaning PRO- Cedure Special Cleaning InstructionsGeneral System InspectionWinterizing Weekly InspectionExploded View Repair Parts List Troubleshooting Guide Warranty Registration Card Filtro modular de tierra De diatomeas System 2TM Índice ¡LEA Y Siga LAS Instrucciones DE SeguridadInformación del propietario Información GeneralCuando limpiar el filtro Advertencia Presión peligrosa. Para evitar leModo de retrolavado EspecificacionesOperación normal Cuadro 2 Especificaciones del filtroEnsamblaje del filtro La instalación del filtro debe InstalaciónArranque Inicial VálvulasProcedimiento de retrolavado del filtro Procedimiento DE Desensamblaje / Ensamblaje DEL FiltroLimpieza DEL Filtro Cuando limpiarloEnsamblaje Pasador DE Seguridad Consulte la FiguraAdvertencia Riesgo de quemaduras de índole Procedimiento DE Limpieza DEL MóduloInstrucciones especiales para la limpieza Inspección semanal Inspección DEL SIS- TemaAcondicionamiento Para EL Invierno Vista Detallada Lista DE Piezas DE Repuesto Guía Para LA Localización DE Fallas Tiempo de ciclo cortoTarjeta de registro de garantía

PLDE48, PLDE36 specifications

Pentair, a global leader in water treatment and sustainability solutions, offers a range of high-performance water filtration systems, among which the Pentair PLDE36 and PLDE48 stand out. These models are designed for both residential and commercial applications, providing reliable water filtration that ensures the quality of water used for drinking, cooking, and other household needs.

The Pentair PLDE36 and PLDE48 are equipped with advanced filtration technologies that enhance their effectiveness. One notable feature is their multi-stage filtration process, which combines sediment filtration, activated carbon filtration, and a specialized membrane to remove a wide range of contaminants from the water. This includes chlorine, sediment, heavy metals, and other harmful substances, ensuring that the output water is clean, safe, and great-tasting.

One of the key characteristics of the PLDE series is its high capacity and flow rate. The PLDE36 is capable of providing up to 36,000 gallons of filtered water, while the PLDE48 can deliver up to 48,000 gallons, making these filters suitable for larger households or small commercial operations. This high capacity reduces the need for frequent filter changes, providing convenience and cost-effectiveness for users.

Another significant aspect of these models is the ease of installation and maintenance. The Pentair PLDE systems come with user-friendly interfaces and clear instructions, allowing for straightforward setup and operation. Additionally, the filter replacement process has been simplified, ensuring customers can easily replace cartridges without requiring professional assistance.

Both the PLDE36 and PLDE48 are built with durable materials designed to withstand various environmental conditions. Their robust construction ensures longevity, which is crucial for maintaining consistent water quality over time. Additionally, these systems come equipped with monitoring features that alert users when it's time to change the filter, further simplifying maintenance.

Energy efficiency is also an integral part of the Pentair PLDE series. Utilizing smart technologies, these systems minimize power consumption while maximizing performance, aligning with the growing demand for eco-friendly solutions.

In conclusion, the Pentair PLDE36 and PLDE48 are advanced water filtration systems that combine innovative technologies, high capacity, ease of use, and sustainability. These features make them ideal choices for anyone looking to ensure access to clean, safe drinking water while also being mindful of environmental impact.