Maytag MBL2258XES Refrigerator Doors and Drawer, Complete the Installation, Style 2-French Doors

Page 5

Style 2

1.Create a service loop (minimum diameter of 2 ft [61 cm]) with the copper tubing. Avoid kinks when coiling the copper tubing.

2.Remove the plastic cap from water valve inlet port. Place a compression nut and sleeve on the copper tubing.

3.Insert the end of the copper tubing into the water valve inlet port. Shape tubing slightly so that the tubing feeds straight into the port to avoid kinks.

4.Slide the compression nut over the sleeve and screw into the water valve inlet port.

A

B

C

D

A. Plastic water tubing

C. Compression nut

B. Sleeve

D. Copper tubing

5.Using an adjustable wrench, hold the nut on the plastic water line to keep it from moving. Then, with a second wrench turn the compression nut on the copper tubing counterclockwise to completely tighten. Do not overtighten.

 

A

 

B

 

C

 

D

 

E

A. Plastic water line

D. Copper tubing

B. Water valve inlet port

E. “P” clamp

C. Compression nut

 

6.Check connection by pulling on copper tubing. Attach copper tubing to refrigerator cabinet with a “P” clamp. Turn on water supply to refrigerator and check for leaks. Correct any leaks.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill the ice container.

Refrigerator Door(s) and Drawer

TOOLS NEEDED: ⁵⁄₁₆", ³⁄₈", ¹⁄₄" hex-head socket wrench, a #2 Phillips screwdriver, and a flat-blade screwdriver.

IMPORTANT:

■Your refrigerator may have a standard reversible refrigerator door (Style 1) with either a freezer door or freezer drawer, or French doors (Style 2). Follow the instructions specific to the door style of your model.

■All graphics referenced in the following instructions are included later in this section after “Final Steps.” The graphics shown for the standard door (Style 1) are for a right-hand swing refrigerator (hinges factory installed on the right).

■If you only want to remove and replace the doors, see “Remove Door(s) and Hinges” and “Replace Door(s) and Hinges.”

■Before you begin, turn the refrigerator control OFF, and remove food and adjustable door or utility bins from the doors.

Remove and Replace Refrigerator Door Handles

Style 1–Standard Door

Front Mount Handle

■To remove the handle, remove the screw attaching the trim to the upper end of the handle. Using a flat-blade screw driver wrapped in masking tape, pry the trim piece from the lower end of the handle. Then, remove the screws attaching the handle to the door. See Front Mount graphic 2.

■To replace handle, reverse directions.

Side Mount Handle

■To remove the handle, remove the four screws attaching the handle to the side of the door. See Side Mount graphic 2.

■To replace the handle, align the holes in the handle with the holes in the door. Then, insert a screw in the upper hole at each end of the handle. Next, insert a screw in the lower holes. Tighten the screws. See Side Mount graphic 2.

Style 2–French Doors

Metal Handles

■Using a ³⁄₃₂" Allen wrench, loosen the two setscrews located on the side of each handle. Pull the handle straight out from the door. Make sure you keep the screws for reattaching the handles. See Metal Handle graphic 1.

■To replace the handles, reverse the directions.

Plastic Handles

■To remove the handle, grasp the lower part of the handle firmly, slide the handle up and pull the handle straight out from the door. See Plastic Handle graphic 1.

■To replace the handle, position the handle so that the large holes in the mounting clips are down and align the holes with the door studs. Rotate the handle so that the mounting clips are flat against the door and slide the handle down to engage. See Plastic Handle graphic 1.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements Location RequirementsWater Supply Requirements Recommended Grounding MethodConnect the Water Supply Style 2-French Doors Complete the InstallationRefrigerator Doors and Drawer Reverse Door Standard Door optional Remove Door and Hinges Style 1-Standard DoorRemove and Replace Freezer Drawer Replace Door and Hinges Style 1-Standard DoorRemove and Replace Drawer Handle Remove Drawer FrontStyle 1-Standard Door Door Removal Replacement Door Swing Reversal optionalDrawer Front Removal Drawer Front Replacement Style1-Freezer Door Models Adjust the DoorStyle 2-Freezer Drawer Models Style 3-Leveling ScrewRefrigerator USE Using the ControlsOpening and Closing Doors Electronic and Dial ControlsDigital Controls Water Dispenser Crisper Humidity ControlIce Maker Water Filtration System CleaningRefrigerator Care Changing the Light Bulb TroubleshootingRefrigerator Operation Refrigerator will not operateIce and Water Temperature and MoistureOff-taste, odor or gray color in the ice Water Filter CertificationsWater dispenser will not operate properly Water is leaking from the dispenser systemApplication Guidelines/Water Supply Parameters Product Data SheetsLimited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverSécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Spécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Pression de leauRaccordement au réfrigérateur Raccordement de la canalisation deauRaccordement à une canalisation d’eau Portes et tiroir du réfrigérateur Achever l’installationStyle 2-Porte à deux battants Dépose des portes et des charnières Style 1-Porte standardCaisse Modèles de compartiments de congélation avec portePorte du compartiment de réfrigération Porte du compartiment de congélationRetirer et réinstaller le tiroir du congélateur Réinstallation Porte et charnières Style 1-Porte standardDépose et réinstallation de la poignée du tiroir Réinstallation de la façade du tiroirStyle 1-Porte standard Inversion du sens douverture de la porte facultatifStyle 2-Portes à deux battants Charnières supérieuresStyle 2-Modèles avec tiroir de congélation Ajustement de la porteStyle 1-Modèles de compartiments de congélation avec porte Utilisation DU Réfrigérateur Utilisation des commandesOuverture et fermeture des portes Style 3-Vis de réglage de laplombAjustement des réglages de commande Commandes numériquesDésactivation/activation du réfrigérateur CONDITION/RAISON AjustementTemp Alarm alarme de dépassement de température Ajustement des réglages de commande numériqueDoor Alarm avertisseur de la porte Pour ajuster les points de réglage de températureMachine à glaçons Distributeur d’eau Remplacement du filtre à eauSystème de filtration de leau Distribution d’eauEntretien DU Réfrigérateur Remplacement de l’ampoule d’éclairageNettoyage Pour nettoyer le réfrigérateurFonctionnement du réfrigérateur DépannageLe réfrigérateur ne fonctionne pas Le moteur semble trop tournerGlaçons et eau Température et humiditéLes portes ne ferment pas complètement La température est trop élevéeMauvais goût, odeur ou couleur grise des glaçons Les glaçons sont creux ou petitsLe distributeur deau ne fonctionne pas correctement ’eau coule du système de distributionSystème de filtration d’eau intérieur Feuilles DE Données SUR LE ProduitGarantie Limitée Garantie DE Gros Appareil Ménager MaytagÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pas

MBL2258XES, W10208789A, W10208790A specifications

The Maytag W10208790A and W10208789A are two innovative refrigerator models that exemplify the brand's commitment to quality and performance. Designed to cater to modern households, these models offer a perfect blend of style, functionality, and advanced technology.

One of the main features of these Maytag refrigerators is their spacious interior. The MBL2258XES model boasts a generous capacity, providing ample storage space for groceries and frozen items. The adjustable shelves and door bins allow for customized storage solutions, making it easier to organize food items effectively. Additionally, the humidity-controlled crisper drawers help maintain optimal freshness for fruits and vegetables, prolonging their shelf life.

The W10208790A and W10208789A refrigerators are equipped with advanced cooling technologies. The dual cooling system ensures that both the refrigerator and freezer compartments maintain consistent temperatures. This not only prevents odors from transferring between the two sections but also enhances energy efficiency. The advanced compressor technology further optimizes cooling, allowing for rapid temperature adjustments in response to changes in the internal environment.

Another standout feature is the Ice Maker System, which provides a steady supply of ice on demand. The Ice Maker is designed for ease of use and convenience, making entertaining and meal preparation a breeze. Additionally, the models come with an optional water filter system, ensuring that the water and ice are clean and refreshing.

In terms of design, the MBL2258XES offers a sleek and modern appearance, available in various finishes to complement any kitchen décor. The stainless steel option provides a professional look, while other finishes give homeowners the flexibility to choose a style that best suits their space. The solid construction of these refrigerators ensures durability and reliability, hallmarks of the Maytag brand.

Energy efficiency is another critical characteristic of the Maytag W10208790A and W10208789A models. They are designed to reduce energy consumption, contributing to lower utility bills and a more sustainable household. The Energy Star certification reflects their commitment to environmental responsibility while retaining high-performance standards.

In conclusion, the Maytag W10208790A, W10208789A, and MBL2258XES refrigerators combine innovative features, performance-enhancing technologies, and stylish design to meet the demands of today's consumers. From ample storage and advanced cooling systems to energy efficiency and a sleek aesthetic, these models are engineered for lasting satisfaction.
Top Page Image Contents