Installation

FG-A1

1.Disconnect power to the primary sump pump.

2.Assemble control panel to battery box with four screws included.

3.Position 12 volt battery (not provided) into battery box.

4.Assemble the two lead wires from control panel to the battery with the two battery clamps included per Fig. 2.

Note: Assemble RED wire to POSITIVE (+) battery terminal and BLACK wire to the NEGATIVE (–) battery terminal. The RED wire is supplied with an in-line fuse (10 amps, 250 volt rating) to protect the battery, pump and wiring should a short, over-current or ground fault occur.

If this fuse must be replaced for any reason, it must be replaced with one of the exact same rating. Failure to do so may result in a fire hazard. If the polarities are connected wrong, the REVERSE battery indicator light on the control panel will come on. Correct the battery wire connections (replace the 1 amp fuse on control panels equipped with fuse).

If voltage of the battery is lower than DC 11 volts, the LOW battery indicator light will

come on and the buzzer sounds for the ALARM function. Battery should be checked by a battery shop.

5.Assemble back-up pump a minimum of 1" above the primary pump and tilt 30° (per Figure 1 below).

The enclosed pump includes a built-in check valve and screws directly into the side of the tee included.

Tee Fitting

30º		Back-Up Sump Pump

Figure 1 Tilting Pump

Bolt

Ring Terminal

Battery Post	Battery Clamp

Figure 2 Attaching Ring Terminals and Battery Clamps

The other two ends of the tee will accept 1-1/4" or 1-1/2" PVC and ABS pipe. An additional check valve (not included) must be installed between the primary pump and this pump. (See page four.)

The nylon belt with buckle, two rigid nylon straps and four screws are not needed and can be discarded.

6.Attach the float switch to the discharge pipe with a wire tie. Be sure that the turn off or down position of the float is above the suction inlet of this pump. Tether at 1-1/4." Insert the plug of the float switch into the SENSOR socket of the control panel.

7.Insert the plug of the battery charger into the CHARGER socket of the control panel and plug the charger into an AC-115 volt power outlet (Figure 3 on page five).

FG-A1 specifications

Pentair FG-A1 is a sophisticated filtration solution designed to meet the demands of modern water treatment applications. This advanced system is engineered to provide exceptional performance and efficiency, making it an ideal choice for both commercial and industrial environments.

One of the defining features of the Pentair FG-A1 is its robust filtration technology. The unit employs a multi-layer filtration process that combines various media to effectively remove impurities from water. This layered approach enhances the filtration capacity, ensuring that even the smallest particles are captured, resulting in cleaner and safer water for its users.

The FG-A1 is equipped with advanced automation capabilities, which streamline the operation and monitoring processes. This integration of smart technology allows for real-time data collection and analysis, enabling users to track system performance and identify maintenance needs proactively. The automated self-cleaning function further reduces the need for manual intervention, minimizing downtime and operational costs.

Durability and reliability are key characteristics of the Pentair FG-A1. Constructed with high-quality materials, this filtration unit is designed to withstand harsh environmental conditions and heavy usage. Its robust design contributes to a longer lifespan, ensuring that users receive an excellent return on their investment. The FG-A1 is also built to accommodate a wide range of water quality parameters, making it adaptable to various treatment scenarios.

Energy efficiency is another significant advantage of the FG-A1. The system is optimized to minimize energy consumption without compromising performance. This commitment to sustainability not only reduces operational costs but also aligns with global initiatives for environmentally responsible practices.

In terms of user-friendliness, the Pentair FG-A1 features an intuitive interface that simplifies operation and monitoring. Users can easily adjust settings and view essential information, enhancing the overall user experience.

Overall, the Pentair FG-A1 stands out in the market for its innovative features, effective filtration technology, durability, energy efficiency, and user-friendly design. It is a reliable solution for industries looking to ensure high water quality while optimizing operational efficiency. With its combination of advanced engineering and practical functionality, the Pentair FG-A1 sets a new standard in water filtration systems.