TemperatureControls
Dial Temperature Controls
([select models)
The controls are located at the back left of the refrigerator compartment.
Note
•The freezer control turns the cooling system on. Neither section will cool if freezer control is set to
OFE
Initial Control Settings
After plugging the refrigerator in, set the controls.
•To adjust the controls, turn the
control knob to the left or right as desired.
•Set the freezer control on 4.
•Set the refrigerator control on 4.
•Let the refrigerator run at least 8 to 12 hours before adding food.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the cabinet. This condition will be more noticeable when you first start the refrigerator, during hot weather and after excessive or lengthy door openings.
Adjusting the Controls
•24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If so, adjust the control(s) as indicated in the Temperature Control Guide table below. See page 23 for instructions on checking compartment temperature.
•Except when starting the refrigerator, do not change either control more than one number at a time.
•Allow 24 hours for temperatures to stabilize.
•Changing either control will have some effect on the temperature of the other compartment.
Temperature | Control Guide |
|
|
|
|
|
| |||
Refrigerator | too warm | Turn | the | refrigerator | control | |||||
|
|
|
| to next higher | number. |
| ||||
Refrigerator | too | cold | Turn | the | refrigerator | control | ||||
|
|
|
| to next lower | number. |
| ||||
Freezer | too | warm |
| Turn | the | freezer control | to | |||
|
|
|
| next | higher | number. |
|
| ||
Freezer | too cold |
| Turn | the | freezer control | to | ||||
|
|
|
| next | lower | number. |
|
| ||
Turn refrigerator | OFF | Turn | the | freezer control | to | |||||
|
|
|
| OFE |
|
|
|
|
|
|
Note
•Turning freezer control to OFF stops cooling in both compartments. It does not shut off power to the refrigerator.
Touch Temperature Controls
([select models, style varies by model)
The controls are located at the top front of the
refrigerator compartment.
Control
Initial Control Settings
After plugging the refrigerator in, set the controls.
• Pressing the | or | pads adjusts the controls to |
the desired setting.
•Set the freezer control on 4.
•Set the refrigerator control on 4.
•Let the refrigerator run at least 8 to 12 hours before adding food.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the cabinet. This condition will be more noticeable when
you first start the refrigerator, during hot weather and
after excessive or lengthy door openings.
10