Maytag Refrigerator warranty FreshFoodFeutures, Shelves, Elevator TM Shelf select models

Page 14

FreshFoodFeutures

Shelves

Your refrigerator has either Spill-CatcherTM or non- sealed shelves. Spill-Catcher TM shelves have a spill retainer edge which allows for easier clean up and some are equipped with the Easy-Glide slide out feature. To slide out (select models), grasp the front of the shelf and pull forward. Push in the shelf to return to the original position.

To Remove a Shelf:

•Slightly tilt up the front and lift up the rear of the shelf, then

pull the shelf straight out.

To Lock the Shelf Into Another Position:

•Tilt up the front edge of the shelf.

•Insert the hooks into the desired frame openings and let the shelf settle into place.

•Be sure the shelf is securely locked at the rear.

The Crisper Top serves as the lower fresh food shelf.

To Remove the Crisper Top:

•Remove drawers as indicated (see page 14).

•Place hand under the frame to push up the glass. Lift glass out.

To Install:

• Repeat above instructions in reverse order.

Elevator TM Shelf (select models)

To Slide Out Elevator TM Shelf:

•Grasp the front of the shelf and pull forward.

•Push the shelf in to return to original position.

To Adjust the Elevator TM Shelf:

•Pull out the knob on the crank handle.

•Rotate the crank clockwise to raise the shelf, and counterclockwise to lower the height of the shelf.

To Remove Elevator TM Shelf:

•Completely unload the shelf and pull the shelf forward.

Pull until the shelf stops.

Press up on the tabs located underneath its outside edges and continue pulling forward until the shelf is clear of the frame.

To Replace Elevator TM Shelf:

•Align the shelf to the frame and push it all the way back. It is not necessary to press up on the tabs for reinstallation.

In ordinary use, the Elevator TM Shelf frame assembly does NOT require removal. Though unlikely, and not recommended, the correct removal procedure is as follows:

To Remove Frame Assembly:

•Unload the shelf completely.

•Slide the shelf forward about 2" and manually move the two rear latches toward the shelf center.

•While supporting the entire shelf and frame from underneath, lift slightly and rotate the assembly approximately 30° to allow the rear mechanism to clear the vertical rear side rails.

•The entire assembly can then be moved forward and clear of the refrigerator compartment.

To Reinstall Frame Assembly:

•Reverse the removal procedure. Be sure the shelf is in a level position. When the sliding shelf is pushed to the rear, it will reposition the rear latches to their correct operating position.

(style may vary)

The Elevator TM Shelf is equipped with a spill-retaining edge and the Easy-Glide TM slide-out feature. It can be adjusted up or down without unloading.

Frame AssemNy

SmideOut Shdf

 

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Fresh Food Features InstallationTemperature Controls Side by SideSafety Instructions Recognize Safety Symbols, Words LabelsSave TH ESE I Nstructions Transporting Your Refrigerator Unplug power cord from power sourceMeasuring the Opening Door and Hinge RemovalTo Reconnect the Water Line Replacing the DoorsTo Disconnect the Water Line For water dispensing models onlyConnecting the Water Supply Materials NeededFront Mount Handle with Extensions Handle InstallationTo Install Materials NeededFull-Length Aluminum Handles To ReinstallWide-by-Side TM Handles To RemoveInstallation Leveling Warm Cabinet Surfaces Touch Temperature ControlsDial Temperature Controls Select models, style varies by modelTriple Cool Climate Control Initial Temperature SettingAdjusting the Control User Preferences Elevator TM Shelf select models FreshFoodFeuturesShelves Dairy Center FreshFoodFemuresStorage Drawers Accessories Grip Pads select modelsFixed Door Bucket select models Adjustable Door BucketsDoor Storage Drop-Down Freezer Door BasketsOperating Instructions To Install the Ice BinAutomatic Ice Maker To Remove the Ice BinTo Use Dispenser Pad Dispenser FeaturesWater Dispenser Operation Dispenser Control select models Ice Dispenser OperationWater Filter Removal Installation select models Replacing Water FilterInitial Installation General Use Conditions Performance DataWater Treatment Device Frozen Food Storage FoodStorugeTipsFresh Food Storage Food Storage Chart FoodStorageTipsPoultry Refrigerator Cleaning Chart If odor is still present Removing Odors From RefrigeratorEnergy Saving Tips Lower Freezer Section Replacing Light BulbsLower Fresh Food Section Upon Your Return Preparing for VacationPreparing to Move OperatingSounds Troubleshooting Form on outside Maker makes Unfamiliar sounds Or seems too loud TemperatureWater droplets Water droplets formDue to improper installation or water connection Ice and WaterLeakage. The manufacturer is not responsible for Water appears cloudy Particles in water and/or ice cubesWarranties What is Not Covered By TheseIf You Need Service
Top Page Image Contents