Maytag Refrigerator warranty Ice and Water, Due to improper installation or water connection

Page 34

Troubleshooting

Ice and Water

No indicator lights are lit on dispenser control

Ice or water are not dispensed when pads are pressed

Ice maker is not

producing enough ice or ice is malformed

Ice maker is not producing ice

Water filter indicator light is

red

Freezer door is not closed.

Refrigerator is not plugged in.

Fuse is blown, or circuit breaker needs to be reset.

Power outage has occurred.

Refrigerator is in Sabbath Mode (select models).

Freezer door is not closed.

Controls are in lock mode (select models).

Water tank is filling.

Ice maker has just been installed or a large amount of ice has been used.

Water filter is clogged or needs to be changed.

Ice maker has just been installed or a large amount of ice has been used.

Water pressure is too low.

Water filter is clogged or needs to be changed.

Ice maker arm is up.

Household water supply is not reaching water valve.

Copper tubing has kinks.

Water pressure is too low.

Check freezer temperature.

Ice bin is not installed properly.

Improper water valve was installed.

Water filter needs to be replaced.

Filter indicator sensor needs to be reset.

Verify that freezer door is closed. Power is removed from the control when freezer door is opened.

Plug in refrigerator.

Replace any blown fuses.

Check circuit breakers for any tripped circuits. Call local power company listing to report outage. See Sabbath Mode page 19.

Verify that freezer door is closed. Power is removed from the control when freezer door is opened.

See Dispenser Lock page 19.

At initial use, there is an approximate one- to two- minute delay in dispensing while the internal water tank is filling.

Wait 24 hours for ice production to begin or for ice maker to restock after emptied.

Change water filter (see page 20].

Wait 24 hours for ice production to begin or for ice maker to restock after emptied.

Low water pressure can cause valve to leak.

Water pressure must be between 35 to 100 pounds per square inch to function properly. A minimum pressure of 35 pounds per square inch is recommended for refrigerators with water filters.

Change water filter (see page 20].

Confirm ice maker arm is down. See Automatic Ice Maker page 17

See Connecting the Water Supply pages/4 and 5.

Turn off water supply and remove kinks.

If kinks cannot be removed, replace tubing.

Water pressure must be between 35 to 100 pounds per square inch to function properly.

A minimum pressure of 35 pounds per square inch is recommended for refrigerators with water filters.

See Temperature Controls pages 10, 11 and 12 to adjust controls. Freezer must be between 0° to 2° F (- 18° to -17° C] to produce ice.

See Ice Storage Bin page 16.

See Connecting the Water Supply pages/4 and 5. Self-piercing and 3A_saddle" valves cause low water pressure and may clog the line over time. The manufacturer is not responsible for property damage

due to improper installation or water connection.

If filter is not available, replace with bypass filter. See Water Filter page 20.

See Filter Status Indicator Light page 19.

continued...

33

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Fresh Food Features InstallationTemperature Controls Side by SideSafety Instructions Recognize Safety Symbols, Words LabelsSave TH ESE I Nstructions Transporting Your Refrigerator Unplug power cord from power sourceMeasuring the Opening Door and Hinge RemovalTo Reconnect the Water Line Replacing the DoorsTo Disconnect the Water Line For water dispensing models onlyConnecting the Water Supply Materials NeededFront Mount Handle with Extensions Handle InstallationTo Install Materials NeededFull-Length Aluminum Handles To ReinstallWide-by-Side TM Handles To RemoveInstallation Leveling Warm Cabinet Surfaces Touch Temperature ControlsDial Temperature Controls Select models, style varies by modelAdjusting the Control Initial Temperature SettingTriple Cool Climate Control User Preferences Shelves FreshFoodFeuturesElevator TM Shelf select models Storage Drawers FreshFoodFemuresDairy Center Accessories Grip Pads select modelsFixed Door Bucket select models Adjustable Door BucketsDoor Storage Drop-Down Freezer Door BasketsOperating Instructions To Install the Ice BinAutomatic Ice Maker To Remove the Ice BinWater Dispenser Operation Dispenser FeaturesTo Use Dispenser Pad Dispenser Control select models Ice Dispenser OperationInitial Installation Installation select models Replacing Water FilterWater Filter Removal General Use Conditions Performance DataWater Treatment Device Fresh Food Storage FoodStorugeTipsFrozen Food Storage Food Storage Chart FoodStorageTipsPoultry Refrigerator Cleaning Chart Energy Saving Tips Removing Odors From RefrigeratorIf odor is still present Lower Fresh Food Section Replacing Light BulbsLower Freezer Section Preparing to Move Preparing for VacationUpon Your Return OperatingSounds Troubleshooting Form on outside Maker makes Unfamiliar sounds Or seems too loud TemperatureWater droplets Water droplets formDue to improper installation or water connection Ice and WaterLeakage. The manufacturer is not responsible for Water appears cloudy Particles in water and/or ice cubesIf You Need Service What is Not Covered By TheseWarranties
Top Page Image Contents