Maytag W10312243A, MTB2254EES, W10312244A installation instructions Refrigerator Doors

Page 5

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

 

A

 

B

 

C

 

D

 

E

A. Tube clamp

D. Compression nut

B. Tube clamp screw

E. Valve inlet

C. Copper tubing

 

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill ice container.

Refrigerator Doors

TOOLS NEEDED: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" putty knife.

IMPORTANT:

Unplug refrigerator or disconnect power.

Remove food and any adjustable door or utility bins from doors.

If you only want to remove and replace the doors, see “Remove Doors and Hinges” and “Replace Doors and Hinges.”

Depending on your model, you have either standard doors or contour doors. If you are going to reverse the door swing, follow the instructions for the appropriate door style.

All graphics referenced in the following instructions are included later in this section after “Final Steps.”

Remove Doors and Hinges

⁵⁄₁₆" Hex-head hinge screw

1.Unplug refrigerator or disconnect power.

2.Open refrigerator door and remove base grille from the bottom front of the refrigerator. See Base Grille graphic.

3.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

4.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.

5.Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.

6.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

Reverse Doors (optional)

IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges.”

Standard Doors

Door Stop Screw

Door Hinge Hole Plug

Door Handle Sealing Screw

Cabinet Hinge Hole Plug

Flat-Head Handle Screw

Round-Head Handle Screw

Door Handle Seal Screw Front

Shoulder Handle Screw

Cabinet

1.Remove ⁵⁄₁₆" hex-head hinge screws from handle side and move them to opposite side. See Graphic 1-1.

2.Remove cabinet hinge hole plugs from cabinet top and move them to opposite side hinge holes as shown in Graphic 1-2.

Freezer Door

1.Remove freezer handle assembly as shown. Keep all parts together. See Graphic 2.

2.Remove door stop. Move to opposite side of freezer door as shown in Graphic 5.

3.Position freezer handle on opposite side of freezer door. Assemble handles on door as shown in Graphic 2.

4.Tighten all screws. Set aside door until hinges and refrigerator compartment door are in place.

5

Image 5
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerRecommended Grounding Method Location RequirementsElectrical Requirements Connect the Water Supply Water Supply RequirementsRefrigerator Doors Contour Doors Refrigerator DoorDoors Replace Doors and HingesDoor Removal Replacement Door Swing Reversal optional Refrigerator USE Adjust the DoorsUsing the Controls Refrigerator Care CleaningCrisper Humidity Control Ice MakerRefrigerator Operation TroubleshootingChanging the Light Bulbs Ice and Water AccessoriesTemperature and Moisture Limited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverSécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurExigences demplacement Instructions DinstallationDéballage du réfrigérateur Retirer les matériaux d’emballageSpécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Pression de leauRaccordement de la canalisation deau Achever l’installationRaccordement à une canalisation d’eau Raccordement au réfrigérateurDémontage Portes et charnières Portes du réfrigérateurInversion de la porte facultatif Portes standardPorte du compartiment de réfrigération Réinstallation Portes et charnièresPortes à contour CaisseDémontage et réinstallation de la porte Inversion du sens douverture de la porte facultatif Ajustement des portes Utilisation des commandesUtilisation DU Réfrigérateur Style Mise en marche/arrêt de la machine à glaçons Machine à glaçonsTaux de production des glaçons CONDITION/RAISON AjustementEntretien DU Réfrigérateur Remplacement des ampoules d’éclairageNettoyage Nettoyage de votre réfrigérateurFonctionnement du réfrigérateur DépannageGlaçons et eau AccessoiresTempérature et humidité Garantie Limitée Garantie DE Gros Appareil Ménager MaytagÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasW10312243A SP PN W10312244A

W10312243A, W10312244A, MTB2254EES specifications

The Maytag MTB2254EES refrigerator is a stylish and efficient appliance designed to meet the needs of modern households. With its sleek exterior and efficient interior layout, it provides ample storage space while ensuring that your food remains fresh and well-preserved.

One of the standout features of the MTB2254EES is its 21.4 cubic feet of capacity. This refrigerator includes adjustable shelves, allowing users to customize the layout to accommodate taller items and maximize storage efficiency. The crispers are perfect for keeping fruits and vegetables fresh, as they are designed to maintain optimal humidity levels. Additionally, its temperature-controlled deli drawer provides easy access to meats and cheeses, ensuring they are stored at the right temperature.

Advanced cooling technologies are also integral to this Maytag model. It includes the PowerCold feature, which rapidly cools the refrigerator after it has been opened, maintaining the internal temperature and preserving food quality. The EvenTemp cooling system uses a combination of electronic controls and strategically placed vents to keep food evenly chilled throughout the unit.

Moreover, the MTB2254EES is built with durability in mind, featuring a robust stainless steel finish that resists fingerprints and smudges, making for easy cleaning and maintenance. The interior of the refrigerator is illuminated by LED lighting, which not only enhances visibility but also uses less energy than traditional lighting systems.

In terms of efficiency, this refrigerator is Energy Star certified, which means it meets stringent energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only helps reduce electricity bills but also contributes to environmental sustainability.

Accessories like the W10312244A and W10312243A are available to enhance the refrigerator's capabilities. These items include water filters that improve the taste and quality of water and ice produced by the refrigerator, ensuring that you and your family enjoy clean and refreshing beverages.

Overall, the Maytag MTB2254EES, along with its compatible accessories, makes an excellent choice for anyone seeking a reliable, spacious, and energy-efficient refrigerator that combines modern design with practical features for everyday use. Whether you're stocking up for a big family meal or simply keeping your daily essentials organized, this refrigerator stands ready to serve your needs with style and performance.