GE JVB93 warranty Care and Cleaning, QUESTIONS? USE this Problem Solver, Problem Possible Cause

Page 4

CARE AND CLEANING

Grease Filter

The efficiency of your downdraft depends on a clean filter. Frequency of cleaning depends on the type of cooking you do. Grease filters should be cleaned at least once a month. Never operate the downdraft without the filters in place.

To remove: Pull the filters out by grasping them and pulling straight up.

To clean: Soak and then agitate in a hot detergent solution. Light brushing may be used to remove embedded soil. Rinse, shake and remove moisture before replacing.

With careful handling, the filter will last for years. If replacement becomes necessary, order the part from your dealer.

NOTE: The filters are different sizes. Be sure to replace them with the longer filter on the left.

When replacing the filters, the long one goes in the left side.

Blower

1.DISCONNECT THE DOWNDRAFT POWER SUPPLY BY REMOVING THE POWER CORD FROM THE RECEPTACLE.

2.Remove the blower cover.

3.Use a vacuum hose to clean the blower. Do not immerse the blower in water.

4.Replace the blower cover.

5.Reconnect the power supply.

Painted or Metal Surfaces

Clean greasy surfaces frequently, using a mild detergent. Do not use abrasive cloth, steel wool pads or scouring powder because they will mar the surface.

Stainless Steel Surfaces (on some models)

Do not use a steel wool pad; it will scratch the surface.

To clean the stainless steel surface, use warm, sudsy water, a stainless steel cleaner such as Kleen King®, or an all-purpose liquid or spray cleaner. Always scrub in the direction of the grain. Rinse thoroughly with a sponge or cloth and clean water. Dry with a soft, clean cloth. After cleaning, use a stainless steel polish, such as Stainless Steel Magic®, Revere Copper and Stainless Steel Cleaner® or Wenol All Purpose Metal Polish®. Follow the product instructions for cleaning the stainless steel surface.

QUESTIONS?

USE THIS PROBLEM SOLVER

PROBLEM

POSSIBLE CAUSE

 

 

FAN DOES NOT WORK

• The vent must be fully extended before the downdraft will work.

 

• The blower control knob must be turned in a clockwise direction to turn

 

the blower on.

 

 

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Safety Instructions Operating Instructions, Tips Care and CleaningProblem Solver GE AppliancesRead and Save These Instructions Using Your Downdraft Vent System ServicingCooking Tips OFF Before Servicing the UnitCare and Cleaning QUESTIONS? USE this Problem SolverProblem Possible Cause Do not use a steel wool pad it will scratch the surfaceInstallation Instructions Requirements for an approved installationSpecifications Tools You Will Need30″ COOKTOPS/DOWNDRAFT Units JVB93 Cutout for36″ COOKTOPS/DOWNDRAFT Units JVB96 JGP960SPlan the Ductwork Steps to Determine Flexible Ducting’s Equivalent LengthPlan the Wiring PreparationChanging Blower Discharge Optional Down DischargeInstall the Ductwork Install the DowndraftInstall the Electrical Wiring Adjust the Switch Install the CooktopTo adjust position of activating switch Warranty

JVB93 specifications

The GE JVB93 is a sophisticated gas turbine designed for both industrial and utility applications, known for its exceptional efficiency and reliability. As part of GE's lineage of advanced gas turbines, the JVB93 incorporates cutting-edge technology to provide a competitive edge in terms of performance and environmental sustainability.

One of the primary features of the GE JVB93 is its high efficiency. The turbine boasts a thermal efficiency exceeding 45%, which translates to reduced fuel consumption and lower greenhouse gas emissions compared to traditional gas turbines. This efficiency is achieved through the utilization of advanced materials and innovative cooling techniques, enabling the turbine to operate at higher temperatures while maintaining structural integrity.

The JVB93 utilizes advanced aerodynamics in its compressor design, which optimizes airflow and improves overall performance. This state-of-the-art compressor is capable of handling variable operating conditions, ensuring reliable performance across a wide range of loads. The turbine also features a modular design, facilitating easier maintenance and quicker upgrades, ultimately reducing downtime and operational costs for users.

In terms of emissions control, the GE JVB93 is engineered with low NOx combustion technology. This means that the turbine produces significantly lower nitrogen oxides during operation, meeting stringent environmental regulations without compromising on performance. The combination of advanced burner technology and precise fuel management helps deliver clean and efficient power, making it an appealing option for companies focused on sustainability.

Another notable characteristic of the GE JVB93 is its versatility. The turbine can accommodate various fuel types, including natural gas, biogas, and liquid fuels, making it suitable for a range of applications from peaking power plants to continuous baseload operations. This adaptability allows facilities to optimize their fuel procurement strategies and enhance energy security.

Furthermore, the JVB93 is equipped with advanced digital technologies, allowing for real-time monitoring and predictive analytics. These capabilities enable operators to identify potential issues before they escalate, facilitating proactive maintenance strategies that enhance reliability and performance over time.

In summary, the GE JVB93 gas turbine stands out due to its high efficiency, low emissions, and advanced technology. Its modular design, versatile fuel capabilities, and digital integration make it an excellent choice for industries seeking to improve energy efficiency while adhering to environmental standards. This combination of features positions the JVB93 as a key player in the global push for cleaner, more sustainable energy solutions.
Top Page Image Contents