HOW Hooking up the Speakers | Russound In-Ceiling speaker instruction

HOW – Hooking up the Speakers

HOW – HOOKING UP SPEAKERS IDENTIFYING POSITIVE AND NEGATIVE (“+” AND “-”)

Speaker wire consists of two conductors, and the wire should be manufactured so you can discriminate between the two. If your wire has transparent insulation, one con- ductor may be copper-colored and the other silver-colored. Generally, professionals denote the copper one as POSI- TIVE (+) and the silver one as NEGATIVE (-).

If you’re using wire with an opaque insulation covering, there will be one of the following differentiating markings:

1.A series of ribs or grooves on one conductor

2.A painted stripe or dotted line on one conductor

3.A string interwoven in the wire strands of one conductor

By convention, the marked conductor is positive (+) for connection at both ends.

NOTE: It is important that you label your wires “left” and “right” at both ends when you run them to elimi- nate confusion during the installation process.

Ceiling Surface

Speaker Cut-out

Integral Swing-out

clamps

Figure 10

AT THE SPEAKER END

1.Mount the speaker frame as shown in Figure 10 . Center and level the frame in the cut-out hole and tight- en the #2 Phillips screws until the clamps rotate and are drawn up snugly from behind, clamping the frame in place. Tighten each screw snugly but do not over tight- en.

2.Cut off excess wire, leaving about 2 feet extending through the frame.

3.Pull the speaker wire conductors apart so they’re sep- arated for the first two inches from their ends.

4.Using a wire stripper, diagonal cutters, or a knife, care- fully remove 1/2 inch of insulation from each conductor.

Figure 11

5.Twist the strands in each conductor into a tight spiral, as shown in Figure 10.

6.Attach the speaker wires to the red and black speaker terminals. Press down on the binding posts while insert- ing the wire into the hole. Connect the POSITIVE (+) conductor to the RED terminal and the NEGATIVE (-) conductor to the BLACK speaker terminal for correct polarity.

7.Make sure that no stray strands of wire are touching the other conductor.

8.Repeat Steps 1 through 7 for the other speaker(s).

Figure 12

In-Ceiling speaker specifications

Russound has long been synonymous with exceptional home audio solutions, and their in-ceiling speakers continue this tradition of quality and innovation. Designed to seamlessly blend into any room without sacrificing sound performance, these speakers are an optimal choice for those who want a clean aesthetic coupled with powerful sound delivery.

At the heart of Russound's in-ceiling speakers is their advanced driver technology. Equipped with high-quality woofers and tweeters, these speakers are engineered to deliver rich, full-bodied sound that is both immersive and dynamic. Whether you are listening to music, watching movies, or enjoying a podcast, the precision of these drivers ensures that every note and voice is reproduced with clarity and depth.

One standout feature of Russound in-ceiling speakers is their versatility. They are designed for various applications, whether your aim is to create a multi-room audio setup or fill a single room with sound. Their low-profile design allows for easy installation and makes them virtually invisible once mounted, allowing your decor to take center stage while providing an exceptional auditory experience.

Additionally, these speakers are often equipped with pivoting tweeters. This technology allows the sound to be directed towards your listening area, further enhancing the acoustic experience. The adjustable sound dispersion ensures uniform coverage, providing a balanced audio experience throughout the space.

Russound’s in-ceiling speakers are also built with durability in mind. Their construction materials are chosen to withstand the rigors of installation within ceilings while minimizing any unwanted resonance or distortion. This attention to detail is evident in both their performance and longevity, making them a reliable choice for years of enjoyment.

Moreover, compatibility with a range of home audio systems enhances their functionality. Whether you're integrating them into a dedicated home theater system or a distributed audio setup, Russound speakers are designed to work well with the latest audio components, ensuring seamless connectivity and a hassle-free experience.

In summary, Russound in-ceiling speakers offer an excellent blend of aesthetic appeal, advanced technology, and versatility. They promise to transform any living space into an audio haven, where quality sound meets seamless design. For those seeking a sophisticated sound solution that complements their lifestyle, Russound's in-ceiling speakers are a formidable option.