Russound In-Ceiling speaker owner manual To Test Polarity, To Test Channel Connections

Page 19

HOW – Final Assembly of Speakers

TO TEST POLARITY:

Polarity refers to the positive (+) and negative (-) electrical elements of the speakers, wires, and connections. The test for polarity ensures that positive and negative wires and connections are not reversed. This test is performed with the speaker wires disconnected from the amplifier/receiver.

It is recommended that the wiring and speaker polarity be tested with a 1.5V AA battery. You’ll need one person at the speaker end and one person at the exit end of the speaker wire near the amplifier/receiver.

1. While one person observes the woofer cone (grille

removed for better visibility), the other person momentarily energizes the wire at the amplifier end with the 1.5V AA battery (the positive conductor at the positive end, the neg- ative conductor at the negative end of the battery).

2.If the woofer cone moves outwards when momentari- ly energized, the speaker is wired correctly. If the woofer cone moves inward, the polarity is reversed, and the wire’s positive and negative conductors must be switched on the back of the speaker.

TO TEST CHANNEL CONNECTIONS:

1.Turn on your stereo system. Make sure that the VOL- UME control is turned down and that the BALANCE con- trol is set to center.

2.Activate a musical source such as FM or CD player.

3.Slowly turn up the volume. You should hear music com- ing out of your new Russound Speakers. (If you don’t, refer to the troubleshooting guide below.)

4.Make sure sound emanates from all speakers in the system.

5.Now rotate the stereo’s BALANCE control all the way to the LEFT. Sound should only come from the left speaker. If sound comes from the right speaker when the stereo’s bal- ance control is turned to the LEFT, you’ll need to swap the connections on the back of the amplifier/receiver.

6.FIRST turn DOWN the VOLUME and turn OFF the AMPLIFIER!

7.Swap the wires attached to the left and right speaker ter- minals.

8.Repeat steps 1 through 5.

A QUICK TROUBLESHOOTING GUIDE Before seeking service from your Russound dealer, please read through these troubleshooting tips for sim- ple remedies.

NO SOUND FROM EITHER SPEAKER:

1.Incorrect source selected on receiver or preamplifier

2.Mute button pressed on receiver

3.Wrong speaker output selected; many receivers have an “A” and “B” speaker switch

4.In-Wall Volume control not turned up or wired incorrectly

5.If using a speaker selector, room/station not turned on or improperly connected

6.Short circuit causing amplifier/receiver to power down or suffer damage

7.Wire disconnected

NO SOUND FROM ONE SPEAKER:

1.Unsecured connection at either the speaker or ampli- fier/receiver

2.Balance control turned all the way left or right

3.Bad connecting cable between sound source and amplifier

4.Short circuit causing amplifier/receiver to power down or suffer damage

For any other speaker performance issues, contact your Russound dealer or call our Tech Services department at 603-659-5170.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Advantage Contents Large HIGH-ENERGY Magnetic Motor Systems High Frequency SwitchIntroduction Woven Glass Fiber WOOFER/MIDRANGE ConeSpace Requirements Wall Requirements Acceptable Installation SituationsUnacceptable Installation Situations Space Requirements & Impedance MatchingSpeaker Care TOO Much PowerTransients Tools Needed for Installation in Existing Walls Getting Started & WHO Installer Skills and ToolsWhat Speaker Usage and Environment What Speaker Usage and EnvironmentDuring NEW INSTALLATION, Keep the Following Tips in Mind When Pre-Construction or Retrofit InstallationRetrofit Installation Home Theater Where Speaker PlacementAvailable locations unobstructed wall and ceiling surfaces Stereo ImagingSurround Sound Where Speaker Placement To Paint Speakers That have not Been Assembled or Installed Wire ConsiderationsTo Paint Speakers That have Been Assembled and Installed HOW Cutting WALL/CEILING Opening for Speaker HOW Cutting Wall/Ceiling Opening for SpeakersHOW Cutting Wall/Ceiling Openings for Speakers Junction BOX InstallationRepeat steps 1 through 7 for the other speaker AT the Speaker END HOW Hooking up the SpeakersConnect to the Amplifier Wall Connector Plate Connect to the Amplifier no Wall Connector PlateRepeat Steps 1 through 5 for the other speakers Twist the baffle clockwise until it locks into the slots HOW Final Assembly of SpeakersHOW Testing Speaker Polarity and Channel Connections For Focused DispersionNo Sound from ONE Speaker To Test PolarityTo Test Channel Connections No Sound from Either Speaker16.5 cm woven glass fiber dual Specifications Speaker Specifications25 13.3 cm woven glass fiber dual Frequency ResponseTweeter 20mm 0.8 aluminum dome, fluid cooled SpecificationsNominal Impedance Tweeter 25mm 1.0 aluminum dome, fluid cooledWarranty Warranty & Repair

In-Ceiling speaker specifications

Russound has long been synonymous with exceptional home audio solutions, and their in-ceiling speakers continue this tradition of quality and innovation. Designed to seamlessly blend into any room without sacrificing sound performance, these speakers are an optimal choice for those who want a clean aesthetic coupled with powerful sound delivery.

At the heart of Russound's in-ceiling speakers is their advanced driver technology. Equipped with high-quality woofers and tweeters, these speakers are engineered to deliver rich, full-bodied sound that is both immersive and dynamic. Whether you are listening to music, watching movies, or enjoying a podcast, the precision of these drivers ensures that every note and voice is reproduced with clarity and depth.

One standout feature of Russound in-ceiling speakers is their versatility. They are designed for various applications, whether your aim is to create a multi-room audio setup or fill a single room with sound. Their low-profile design allows for easy installation and makes them virtually invisible once mounted, allowing your decor to take center stage while providing an exceptional auditory experience.

Additionally, these speakers are often equipped with pivoting tweeters. This technology allows the sound to be directed towards your listening area, further enhancing the acoustic experience. The adjustable sound dispersion ensures uniform coverage, providing a balanced audio experience throughout the space.

Russound’s in-ceiling speakers are also built with durability in mind. Their construction materials are chosen to withstand the rigors of installation within ceilings while minimizing any unwanted resonance or distortion. This attention to detail is evident in both their performance and longevity, making them a reliable choice for years of enjoyment.

Moreover, compatibility with a range of home audio systems enhances their functionality. Whether you're integrating them into a dedicated home theater system or a distributed audio setup, Russound speakers are designed to work well with the latest audio components, ensuring seamless connectivity and a hassle-free experience.

In summary, Russound in-ceiling speakers offer an excellent blend of aesthetic appeal, advanced technology, and versatility. They promise to transform any living space into an audio haven, where quality sound meets seamless design. For those seeking a sophisticated sound solution that complements their lifestyle, Russound's in-ceiling speakers are a formidable option.
Top Page Image Contents