GE JV966, JV965 Install Motor, Connect Electrical, Install Duct Covers, Install Filter Support

Page 17

Installation Instructions

7INSTALL MOTOR

Align and engage the

slots in the blower

Motor Attachment Bracket

 

assembly to the 3 hooks

 

at the rear of the

 

exhaust opening.

 

Motor Hooks

• Rotate motor upwards until it aligns with the attachment screw location.

• Secure the motor to attachment bracket at the front of the opening with washer and screw provided.

Plug the motor connector into the mating hood connector. See

the illustration for the hood connector location. Touch the hood to locate and make the connection.

IMPORTANT: Hold the connector so the two square corner terminals are at the top as you position the connector to plug it in.

8 CONNECT ELECTRICAL

Verify that power is turned off at the source.

WARNING: If house wiring is not 2-wire with a ground wire, a ground must be provided by the installer. When house wiring is aluminum, be sure to use U.L. approved anti-oxidant compound and aluminum-to-copper connectors.

A Remove

C Insert Power

 

Junction Box

Conduit Thru

 

Cover

Strain Relief

 

 

and Tighten

 

 

Ground

White

 

Black

B Check That White, Black and

 

Green Hood Wires Are Threaded

 

Thru Small Hole in Bracket

 

 

D Use UL Listed Wire Nuts

 

Use wire nuts to connect incoming ground to green, white to white and black to black.

Push wires into junction box and replace cover.

Be sure wires are not pinched.

17

9 INSTALL DUCT COVERS

To install the 12 duct cover alone:

Place the 12 section of the decorative duct cover on top of the hood.

Secure the cover to the top of the hood with 4 screws provided.

To install the 2-piece duct cover:

Place the 2-piece duct cover on top of the hood.

Secure the bottom cover to the top of the hood with 4 screws provided. See illustration, page 16.

Extend the inside section upwards to meet the ceiling and ceiling bracket.

Secure the duct cover to the bracket with the 2 small Phillips screws provided.

10 INSTALL FILTER SUPPORT

Tip filter support into the rear of the hood.

Insert support tabs into the slots at the rear of the hood.

Insert Tabs Into Slots

Install 2 Screws

Secure the support to the hood with screws as shown.

Image 17
Contents Range Hoods Safety Precautions Read and Save These Instructions Light Control Using the hood controlsFAN Control Stainless Steel Surfaces on some models Care and cleaning of the vent hoodPainted Surfaces on some models To remove Hood LightsRead these instructions completely and carefully Product DimensionsOptional Accessories Installation ClearancesDuct Cover Commercial Filter KitAdvance Planning Power SupplyDuct Fittings Decorative Duct CoversFlexible ducting Will reduce performanceLift hood by the exhaust opening divider damage will occur Tools and MaterialsRemove the Packaging Duct Cover Requirements Duct Cover AccessoryParts Provided House Wiring Location Determine HOOD, Ductwork and Wiring LocationsInstall Transition Install Hood SupportInstall Hood Onto Wall Drill Bottom Mounting Hole LocationsAlternate Mounting Method Connect Ductwork Install Ceiling BracketInstall Duct Covers Install MotorInstall Filter Support Connect ElectricalFinalize Installation Install FiltersInstall Control Knobs Page Excessively soiled filters Before you call for service…We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration What GE Will Not Cover GE Range Hood WarrantyGE Will Replace Parts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

JV966, JV936, JV965 specifications

The GE JV965, JV936, and JV966 are part of GE's highly regarded line of kitchen appliances, specifically designed for modern households that prioritize efficiency, technology, and user-friendly features. These models offer a blend of style and functionality, ensuring that cooking is not only convenient but also enjoyable.

The GE JV965 features a spacious design that accommodates a variety of cooking needs. Its sleek stainless-steel composition not only enhances the aesthetic appeal of the kitchen but also provides durability against daily use. One of the standout features of the JV965 is its advanced cooking modes, which include convection baking and broiling, allowing for even heat distribution and superior results. The model also includes a self-cleaning function, which saves time and effort in maintaining kitchen hygiene.

The JV936, on the other hand, places a significant emphasis on smart technology. This model features built-in Wi-Fi connectivity that enables users to control the oven remotely through a smartphone app. This capability allows for preheating from anywhere and monitoring cooking progress, making it a truly modern appliance. Furthermore, the JV936 comes equipped with a temperature probe, which ensures perfectly cooked meats by alerting users when their dish reaches the desired internal temperature.

Not to be outdone, the GE JV966 model also showcases cutting-edge technology with its integrated air fryer capabilities. This feature allows users to cook healthier meals by using little to no oil while still achieving that crispy texture often desired in traditional frying. Like its counterparts, the JV966 also includes a self-cleaning option, as well as smart functions, which make cooking more intuitive than ever.

All three models boast an intuitive interface, making it easy for users of all skill levels to navigate various cooking settings and features. They are designed to offer robust cooking performance while being energy efficient, minimizing their environmental impact.

In summary, the GE JV965, JV936, and JV966 represent a leap forward in kitchen technology, combining modern design with practical features. Whatever the cooking need, these models deliver superior performance, user-friendly controls, and innovative functionalities, making them ideal choices for today’s home chefs.