Russound Advantage Series owner manual To Paint Speakers That have Been Assembled and Installed

Page 14

HOW – Painting the Speaker Frames and Grilles

TO PAINT SPEAKERS THAT HAVE BEEN

ASSEMBLED AND INSTALLED:

1Remove the speaker grilles from the frames, being careful not to damage the paint. Use a small pointed object and start at the corner or edge of the grille.

2Remove the scrim cloth by gently separating it from the inside surface of the perforated grille, being careful to keep it clean. Store it before you begin painting.

3Center the included black plastic paint shield over the speaker baffle and press into the frame.

4Paint the outer speaker frame and grille separately. For the grille, Russound recommends a spray applica- tion using latex paint diluted 4 to 5:1 with water. If you’re using an aerosol spray paint, make sure that you achieve the same coverage on both grille and frame.

5While the paint is still wet on the grille, and the grille is not in the frame, use a gentle burst of com- pressed air against the outside surface to clear the fine holes in the metal mesh.

6After the paint has thoroughly dried, remove the paint shield from the frame and store for future use. The shield may be held in by a vacuum seal. Pull gently but firmly to slowly break the seal and remove.

7Reattach the scrim cloth to the grille, starting from the edge and smoothing wrinkles as you go.

Note: Speaker frames can become bonded to the wall or ceiling surface paint when they are painted after installation. Use care not to break the surface of the paint when replacing the grille or baffle in the frame.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Contents Russound Advantage High Frequency SwitchIntroduction Large HIGH-ENERGY Magnetic Motor SystemsSpace Requirements & Impedance Matching Acceptable Installation SituationsUnacceptable Installation Situations Wall RequirementsSpeaker Care TOO Much PowerSpeaker Care TransientsTools Needed for Installation in Existing Walls Getting Started & WHO Installer Skills and ToolsRequirements? HOW How are the speakers installed? What Speaker Usage and Environment What Speaker Usage and EnvironmentRetrofit Installation When Pre-Construction or Retrofit InstallationDuring NEW INSTALLATION, Keep the Following Tips in Mind Stereo Imaging Where Speaker PlacementAvailable locations unobstructed wall and ceiling surfaces Home TheaterSurround Sound Fidelity Wire Wire Requirements Wire ConsiderationsHOW Painting the Speaker Frames and Grilles To Paint Speakers That have not Been AssembledTo Paint Speakers That have Been Assembled and Installed HOW Cutting Wall/Ceiling Opening for Speakers HOW Cutting WALL/CEILING Opening for SpeakerJunction BOX Installation Repeat steps 1 through 7 for the other speakerHOW Hooking up the Speakers AT the Speaker ENDRepeat Steps 1 through 5 for the other speakers Connect to the Amplifier no Wall Connector PlateConnect to the Amplifier Wall Connector Plate To Test Polarity HOW Final Assembly of SpeakersHOW Testing Speaker Polarity and Channel Connections No Sound from Either Speaker To Test Channel ConnectionsMake sure sound emanates from all speakers in the system No Sound from ONE SpeakerSpecifications Speaker Specifications Frequency Response SpecificationsRecommended Power Warranty & Repair WarrantyLR3130-0009

Advantage Series specifications

The Russound Advantage Series represents a pinnacle of innovation in the world of multi-room audio systems. Tailored for both residential and commercial applications, this series is designed to offer versatile, high-quality sound while ensuring user-friendly operations.

One of the key features of the Advantage Series is its modular design. This allows for easy expansion and customization to fit varying audio demands. Users can start with a basic setup and gradually add components to scale the system as needed. This flexibility is particularly beneficial for users who may be uncertain of their long-term audio needs.

Central to the Advantage Series is its high-performance audio technology. Utilizing advanced amplifiers and digital signal processing, the system delivers crystal-clear sound across all zones. The incorporation of innovative technologies ensures that listeners experience audio fidelity that meets or exceeds expectations regardless of the space or application.

The series also provides robust integration options. Russound has designed the Advantage Series to seamlessly integrate with a variety of third-party automation and control systems, such as HomeWorks and Crestron. This compatibility is crucial for creating a cohesive smart home experience, as it allows users to control their audio with user-friendly interfaces, whether through touchscreens, smartphone apps, or voice commands.

Another remarkable characteristic of the Advantage Series is its zone control capabilities. Users can create individual listening zones throughout their home or business, allowing different audio sources to play in different areas simultaneously. Each zone can be controlled independently, providing the ultimate in personalization and enjoyment.

User experience is further enhanced through the use of intuitive user interfaces. The Advantage Series offers a range of controller options, from wall-mounted keypads to mobile applications, ensuring ease of use for everyone. Additionally, the system supports both wired and wireless connections, offering flexibility in installation and operation.

In conclusion, the Russound Advantage Series is an outstanding choice for anyone seeking a sophisticated multi-room audio solution. With its modular design, high-quality audio performance, seamless integration, and user-friendly controls, the Advantage Series stands out as a leader in the audio industry, providing an immersive listening experience for any environment.
Top Page Image Contents