ZSC2200N/ZSC2201N/ZSC2202N
GE Monogram® Built-In Advantium® Oven
Dimensions and Installation Information (in inches)
Important: These installation cutouts do not include the accessory drawer.
Single Advantium 240V installation
30"
Construct Base
Min. 3/8" Plywood Supported by 2 x 4 or 2 x 2 Runners all Four Sides
•Maintain
to the cutout in any single or combined installation.
•Allow
Installation over a Monogram Oven
30" | Construct Solid | |
|
| Bottom Min. 3/8" |
|
| Plywood |
|
| Supported by |
| 2 x 4 or 2 x 2 | |
| Runners, all | |
|
| |
|
| Four Sides |
| 2" Min. | |
|
| |
|
| Per Oven |
|
| Requirement |
Recommended
Additional clearances between the cutouts may be required. See oven installation instructions for details.
Installation over a Monogram
Warming Drawer
30" | Construct Solid | ||
|
|
| Bottom Min. 3/8" |
|
|
| Plywood |
|
| Supported by | |
|
| 2 x 4 or 2 x 2 | |
|
|
| Runners all |
|
|
| Four Sides |
| 2" Min. | ||
|
|
| Per Warming |
|
|
| |
|
|
| Drawer |
|
|
| Requirement |
Additional clearances between the cutouts may be required. Check to be sure the oven supports above the warming drawer do not obstruct the required interior depth and height. See warming drawer installation instructions for details.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Installation over a Monogram Oven and Warming Drawer
30" | Construct Solid | |
Bottom Min. 3/8" | ||
|
| Plywood |
|
| Supported by |
| 2 x 4 or 2 x 2 | |
| Runners all | |
|
| Four Sides |
| 2" Min. |
Per Oven
Requirement
2" Min.
Per warming drawer requirement
Additional clearances between the cutouts may be required. See warming drawer and oven installation instructions for details.
Listed by
Underwriters
Laboratories
Specification Created 6/08 | 130310 |