GE ZSC2201NSS with ZX2201NSS, GE Monogram Built-In Advantium Oven with Accessory Drawer

ZSC2201NSS with ZX2201NSS

GE Monogram® Built-In Advantium® Oven with Accessory Drawer

Dimensions and Installation Information (in inches)

ZSC2201NSS and ZX2201NSS Accessory - GE Monogram Built-in Advantium Oven and Accessory Drawer

Important: These installation cutouts include the ZX2201NSS accessory drawer.

ZSC2201NSS Advantium Installation with Accessory Drawer

30"	23-1/2"
	21-1/2"
	Recessed
	Depth
	25-1/4"
	Min.
21"	22-1/4"
	29-3/4"
36-3/4"	Construct
	Base
Min.	Min. 3/8"
	Plywood
	Supported
	by 2x4 or 2x2
	Runners all
	Four Sides

•Maintain 36-3/4" minimum height from the floor to the cutout in any single or combined installation.

•Allow 2-1/8" case trim overlap on the sides and 7/8" overlap on the bottom. Allow 3/4" overlap at the top of the oven.

ZSC2201NSS Advantium and Accessory Drawer Installed over a Monogram Oven

36-3/4” Min.

45-1/4” Recommended

Additional clearances between the cutouts may be required. See oven installation instructions for details.

ZSC2201NSS Advantium and Accessory Drawer Installed over a Monogram Warming Drawer

30"	23-1/2"	Construct Solid
		Bottom Min. 3/8"
		Plywood
	25-1/4"	Supported by
		2 x 4 or 2 x 2
		Runners all
		Four Sides
21"		2" Min
		Per Warming
		Drawer
		Requirement

36-3/4" Min.

Additional clearances between the cutouts may be required. Check to be sure the oven supports above the warming drawer do not obstruct the required interior depth and height. See warming drawer installation instructions for details.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

ZSC2201NSS Advantium and Accessory Drawer Installed over a Monogram Oven and Warming Drawer

30"	23-1/2"	Construct Solid
		Bottom Min. 3/8"
		Plywood
		Supported by
	25-1/4"	2 x 4 or 2 x 2
		Runners all
		Four Sides
21"		2" Min.

Per Oven

Requirement

2" Min.

Per warming drawer requirement

45-1/4"

Additional clearances between the cutouts may

be required. See warming drawer and oven installation instructions for details.

Listed by

Underwriters

Laboratories

Specification Created 6/08 130310