To replace the bulb(s), first disconnect the power at the main fuse or circuit breaker panel or pull the plug.
Replacing the light bulbs. | www.GEAppliances.com |
Cooktop Light/Night Light
Replace the
Remove screw
1
2 Remove the screw at the right edge of the light cover and push on the left edge of the cover to open.
3 Be sure the bulb(s) to be replaced are cool before removing. After breaking the adhesive seal, remove the bulb by pulling straight out. Replace with the same size and type bulb.
4 Raise the light shield and replace the screw. Connect electrical power to the oven.
Safety Instructions
Operating Instructions
Troubleshooting Tips
Consumer Support
35