www.GEAppliances.com
Charcoal Filter (on some models)
The charcoal filter cannot be cleaned. It must be replaced. Order Part No. WB2X10733 from your GE supplier.
If the model is not vented to the outside, the air will be recirculated through a disposable charcoal filter that helps remove smoke and odors.
The charcoal filter should be replaced when it is noticeably dirty or discolored (usually after 6 to 12 months, depending on hood usage).
To Remove Charcoal Filter
Safety Instructions
Operating
Remove grille screws to remove the grille.
To remove the charcoal filter, disconnect power at the main fuse or circuit breaker panel or pull the plug.
Remove the top grille by removing the screws on top of the grille that hold it in place and sliding the grille to the left (opening the door makes grille removal easier). Slide the filter towards the front of the oven and remove it.
Instructions
To Install Charcoal Filter
To install a new filter, remove plastic and other outer wrapping from the new filter.
Insert the filter into the top opening of the oven as shown. It will rest at an angle on 2 side support tabs and in front of the right rear tab. Replace the grille and screws.
Troubleshooting Tips
Consumer Support
37