GE JVM64 manual How tcpUse the Hold/Timer, GkEstims Answers, Start

How tcpUse the Hold/Timer

I

L

L

1’

Your HOLD/TIMER, which qper- ates without microwave enqrgy, has three timing functions.

It operates as a Minute Tim$r, it can be set to delay cooking or may be used as a hold setting after defrosting. Hold/Timer can b@ set up to 99 minutes and 99 secorids.

step ~: Touch HOLD/TIMER pad. The read-out panel shows :0. “’En- ter Time” flashes.

Step 2: Select the amount of ~ime you desire. Touch the appropriate number pads. If, for example, you

are timing a three minute phone call, touch 3, 0 and O. The readout panel shows 3:00 and “HOLD” appears on display.

Step 3: Touch START. The readout display shows the time as it counts down, and “Hold Time Left”.

Step <.: When time is up, oven sounds. The readout flashes “END” and the timer turns off.

The HOLD/TIMER can also be used to program “standing time” between microwave cooking func-

tions. The time can range from one second to 99 minutes and 99 sec- onds. A HOLD, or “standing” time may be found in some of your own recipes or Cookbook.

To set the oven to delay cooking up to 99 minutes follow Steps 1 and 2 to enter hold time, then set time or temperature desired before pressing START. When holding be- fore temperature cooking, be sure probe is in food before pressing

START.

i!%! %2De?rosi—Hoiti/Time-Time cook

To help you become acquainted with the HOLD/TIMER feature as used with Time Cook or Temp Cook follow

Steps below to defrost a frozen casserole for 15 minutes, then hold 10 minutes and then cook 25 minutes. if using Temp Cook after Hold/Timer, be sure to insert probe correctly as shown on page 14.

s@ :: Remove casserole from the freezer and place in oven. Touch the DEFROST pad. The readout

panel shows “Enter Def Time”, :0, and Dower 3.

lum~

Step 2: Touch 1, 5, 0 and O ,for defrosting time. Def Time, 15]00, and Power 3 appear on the dis~lay panel. (Defrosting is automatically set on Power Level 3 but can be

changed by touching POWIER LEVEL pad and the new Power Level.)

GkEstims

and Answers

C). WVhat W;!! happe- !f ; ~cc~~~:- :a!!v rwe. rsen tha... -,4,iacJ~:~c~j~~s7

A. ‘If you accidentally reverse the seol tence of programming instruc-

tic your oven automatically rearranges your program. Defrcpst- ing always comes first, then hc$ld, and then the cooking function.

———

Step 3: Set standing or hold time

by touching HOLD/TIMER. “Enter Time” and :0 appear on dispiay.

Step 4: Touch 1, 0, 0, and O to hold for ten minutes. 10:00 and “HOLD” appear on the display.

Q. Can ! 3ekost-Ho!ci oniy on T.y Sverl 7.

A. Sometimes you may want to de- frost a food, hold it, and refrigerate it to be cooked later. All you need to do is program in Defrost and amount of time. Then program Hold and amount of time. Put your thawed dish in the refrigerator and cook later at a convenient time.

NOTE: Allow foods to remain at room temperature only as long as safe. Times will vary.

11

Step 5: Touch the TIME COOK pad. The display shows “Enter Cook Time”, :0, and Power 10 (HIGH).

Step 6: Touch 2, 5, 0, and O for

twenty-five minutes of cooking time. “Cook Time”, 25:00, and

Power 10 appear on the dis- play panel.

Step 7: Touch START. “Def Time Left”, Power 3, and 15:00 counting down show on display. As each

function is automatically per- formed oven display shows en- tered information.

n;	prograx-eci	my even for a
u. 1

Spedfic defrosting time but it de- f:~sted lon~er t’nan necessary.

What happened?

A. When instructions conflict, the oven carries out the last instruc- tion. You may have set the oven to Defrost for 4 minutes, Hold/Time for 2 minutes, and then Defrost for 6 minutes. In this case, the oven would Defrost for 6 minutes and Hold/Time for 2 minutes.

_———