Toshiba specifications SR-C8002 Rev.1.0

Page 3

DO NOT use this equipment in the system such as medical equipment which may cause personal injury or property damages resulting from malfunction of this equipment and unexpected data corruption or data error in reading operation.

4.Turn off the power for this equipment and wait more than one (1) minute before you eject the disc using the emergency eject mechanism when a disc cannot be ejected for some reasons in order to avoid the risk of damages to the disc.

Notice

1.Turn off the system power before mounting/removing this equipment in order to avoid the risk of damages to this equipment.

2.Insert the DC power plug in correct direction in order to avoid the risk of damages to this equipment.

3.Handle this equipment only in electrostatically safe environment and do not touch connecting terminals with empty hands when you build in or pull out this equipment from other product in order to avoid the risk of malfunction of this equipment.

4.DO NOT do any of the following:

4.1.DO NOT use storage media (CD's / DVD's) that are not the correct size or shape, ordo not meet the minimum formatting requirements set forth in section 3.1.(1) of this Product Specification.

4.2.DO NOT insert more than one (1) CD or DVD disc into the drive at any time. Doing so will damage or destroy this equipment and could damage or destroy the disc or cause data loss or corruption.

4.3.DO NOT load or eject any CD or DVD disc with force. Doing so will damage or destroy this equipment and could damage or destroy the disc or cause data loss or destruction.

4.4.DO NOT give a strong shock while load or eject operation is in process. Doing so will damage or destroy this equipment and could damage or destroy the disc or cause data loss or corruption.

4.5.DO NOT eject a CD or DVD disc while the drive is in operation. Doing so will damage or destroy this equipment and could damage or destroy the disc or cause data loss or corruption.

4.6.DO NOT insert anything else into the drive other than a CD or DVD disc. Doing so will damage or destroy this equipment.

-----To OEM Customers: -----------------------------------------------------------------

Please notify below notice to your customers.

Notice

Copyrighted works including, but not limited to music, video, computer program, database are

protected by copyright laws. Unless specifically permitted under applicable copyright laws,

you cannot copy, modify, assign, transmit or otherwise dispose of any copyrighted work

without the consent of the owner of the copyright.

Please take notice that unauthorized copying, modification, assignment, transmission and

other disposition may be subject to claims for damages and to penalties.

SR-C8002 Rev.1.0

Image 3
Contents Toshiba Limitation of Liability SR-C8002 Rev.1.0 Contents SR-C8002 Rev.1.0 Introduction FeaturesCD-DA, CD+EG, CD-MIDI, CD-ROM,CD-ROM XA SpecificationsSR-C8002 Rev.1.0 SR-C8002 Rev.1.0 14.7 m/s2 1.5 G Horizontal M/s2 0.8 G Installation Conditions R63 R59 R46 Do not add Force External Dimensions Configuration CD-R / RW Drive Model SR-C8002 Block Diagram Functions 11/24Interface 12/2413/24 Shows the Signal SpecificationsShows the Host Interface Timings 14/24Shows the Host Interface DMA multi word Timings 15/2416/24 Connector pin assignments17/24 Support Command List Atapi Packet CommandPower Requirements OP Code Command Description18/24 CD Audio Test condition Ordinary temperature Device Configuration Jumper19/24 20/24 Busy IndicatorSafety Standards/Agency Approvals Tentative 21/24Emergency Release Packaging Accessories22/24 Electrostatic DischargeDocument No.YEA R2597Page1 23/24Document No YEA-R2597 Revision 24/24ED-Directive Related Standard Issude Level/Test condition Product/Options Model Related EU-Directive 89/336/EECCD-RW Such as 95 ms access TimeG e I t e m Rev # 0 Rev # 1