Toshiba SD-V594SC owner manual Lightning

Page 4

Introduction

IMPORTANT SAFEGUARDS

13.LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14.POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

15.OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16.OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17.OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

 

ANTENNA LEAD IN WIRE

GROUND CLAMP

 

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810-20)

ELECTRIC SERVICE

GROUNDING CONDUCTORS

EQUIPMENT

(NEC SECTION 810-21)

 

 

GROUND CLAMPS

 

POWER SERVICE GROUNDING

NEC-NATIONAL ELECTRICAL CODE

ELECTRODE SYSTEM

S2898A

(NEC ART 250, PART H)

 

18.SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

For example:

a.When the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the unit.

c.If the unit has been exposed to rain or water.

d.If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.

e.If the unit has been dropped or the cabinet has been damaged.

f . When the unit exhibits a distinct change in performance, this indicates a need for service.

4

2I40301A-En_p02-13

4

21/3/06, 9:41 AM

Image 4
Contents SD-V594SC Introduction Location of the required MarkingS3125A IntroductionLightning Heat Power sourceDisc Precautions Do not use the DVD/VCR when moisture condensation may occurWait Moisture condensation occurs during the following casesOn cleaning discs Structure of disc contentsOn handling discs On storing discsAbout this ownerÕs manual On Video CDsPlayable USB Mass Storages Equipment Brand ModelsContents Front panel Identification of controlsRear panel Display window VCR operation statusDisc operation status While watching TV While operating a tapeRemote control DVD Menu buttonTV control buttons ¥CABLE BOX control buttonsInserting batteries OperationMulti brand remote control Setting TV control codes Table of TV brand codesPower TV Display Input Select Program VOL +/Ð EnterBrand name Brand CodeAntenna connections Antenna to DVD/VCR connectionConnections UHFConnections Set the TV/CABLE menu option to Òtvó mode To the Òtvó modeSet the TV/CABLE menu option to Òtvó mode DVD/VCR to TV connectionCable TV connections Connections Allows Prevents Connecting to a TV Basic connectionProgressive outputs ConnectionsInterlaced outputs Connecting to a display Using the Hdmi cable About HdmiPicture Output ¥ DVD Mode ¥ VCR ModeWhen Hdmi Output setting is ÒOffÓ During Hdmi OutputConnecting to an audio equipment Connecting to an amplifier equipped with a DTS decoderDolby Digital Dolby Surround Pro LogicMPEG2 sound Connecting to a USB Mass Storage Connecting to a USB Mass StorageSetting the video channel Setting the video channelBasic setup VCR Power DVD/VCR TV/VCR DVD/VCR SelectSetting the language Setting the languageDVD/VCR Enter SET +/Ð VCR Menu DVD/VCR SelectClock setting Auto Clock settingAuto Clock adjustment Power DVD/VCR Call Enter SET +/Ð VCR Menu DVD/VCR SelectTo set Standard Time Press SET + or Ð to select your time zone, then press EnterManual clock setting SET +/Ð Enter CancelBasic setup VCR Press SET + or Ð to set the month, then pressTuner setting Setting channels automaticallyTV/CABLE selection DVD/VCR Enter SET +/Ð VCR Menu DVD/VCR SelectTo ADD/DELETE channels Noise eliminationEnter SET +/Ð VCR Menu To delete channelsLoading and unloading a cassette tape LoadingUnloading To prevent accidental erasurePlayback Rewind or forward the tape Cassette tape playbackDVD/VCR Stop Play FWD REV DVD/VCR Select Special playback Convenience function Repeat playback Zero return functionClock/counter display Video index search system Sqpb S-VHS Quasi PlaybackStop Viss +/Ð CLOCK/COUNTER DVD/VCR Select CounterRecording a TV program Recording a TV programRecording VCR SP/SLP DVD/VCR Select REC/OTRTo stop recording To stop recording temporarilyRecording one program while watching another Stop PAUSE/STILL TV/VCROne-touch Timer Recording OTR One-touch Timer Recording OTRStop SP/SLP DVD/VCR Select REC/OTR Timer recording Timer recordingPress VCR MENU. Select Òtimer REC Setó Then press Enter Press SET + or Ð to select the date, then pressSetting procedure To set daily/weekly timer To confirm or cancel a programSET +/Ð Enter Cancel VCR Menu DVD/VCR Select Timer REC If the programs overlap anotherStereo recording and playback Second Audio Program SAP Stereo recording and playback Second Audio Program SAPOther functions VCR Enter SET +/Ð VCR Menu Audio SelectDuplicating a video tape Duplicating a video tapeDVD/VCR Input Select Stop SP/SLP Press DVD/VCR Select selector to select the DVD mode Press Stop when you finish recordingRecording a DVD/CD disc Duplicating a DVD or CD discTo start playback in the stop mode Playing a discVCD Basic playback Basic playback DVDOr standing by for timer recording Basic playbackOPEN/CLOSE Playing a Disc while the VCR section is recordingVCD Playing in fast reverse or fast forward directions Vcddvd Playing frame by frameVcddvd Playing in slow-motion VCD Locating a chapter or trackZooming/Locating desired scene VCD ZoomingAdvanced playback DVD Display JumpMarking desired scenes Enter Clear MarkerRepeat playback/A-B Repeat playback Vcddvd Repeat playbackVCD A-B Repeat playback Enter Play Playmode RPTProgram playback/Random playback VCD Program playbackVCD Random playback Enter Clear Play PlaymodeChanging angles/Title selection/DVD menu DVD Changing anglesDVD Title selection DVD DVD menuDVD Changing soundtrack language Changing soundtrack language Setting surround soundAudio Subtitles/To turn off the PBC DVD SubtitlesTo turn off the PBC see Enter Subtitle PlaymodeMP3/WMA/JPEG/DivX and Audio CD operation MP3/WMA/JPEG/DivX¨ data informationLimitations on MP3/WMA/JPEG/DivX¨ playback Limitations on displayLoading media MP3/WMA and Audio CD playbackEnter Return Stop Play DVD/USB OPEN/CLOSE Press Stop to end playbackTOP Menu Zoom DVD Menu Slide show playbackSkip DivX¨ playback Playing DivX¨ VOD contentEnter Stop Play Repeat playback CD/USB Random playback CD/USBEnter Play Program playback CD/USBBrowser View Program View Customizing the function settings VCD Setting procedureFunction setup DVD Enter Return SetupSetting details Menu, Subtitle, Audio English, Francais, EspanolOther Original AudioPicture Mode DisplayJpeg Interval OffDRC Digital OutPCM BitstreamParental control setting If you forget the passwordSet the new password HD JpegOutput InterlaceProgressive DivX¨ VODPlayback will commence if the entered password was correct DVD Temporary disabling of rating level by DVD discEnter Return Play OPEN/CLOSE Load a DVD disc and press Play or OPEN/ Close on the unitLanguage code list OthersTroubleshooting Symptoms SolutionsSpecifications Supplied accessoriesGeneral Input/OutputCanadian Warranty Information Garantie Canadienne Memo Others2I40301A-Enp70-BACK 21/3/06, 946 AM

SD-V594SC specifications

The Toshiba SD-V594SC is a versatile and innovative dual-format DVD player and VCR combo that serves as a bridge between traditional and modern media. With its ability to play both DVDs and VHS tapes, the SD-V594SC appeals to a broad audience, accommodating those who still cherish their classic VHS collections while enjoying the convenience of DVD technology.

One of the standout features of the SD-V594SC is its compatibility with a wide range of formats. It supports not only standard DVDs but also DVD-R, DVD-RW, and various other DVD formats, ensuring users can play their favorite movies and shows without hassle. On the VHS side, it delivers a reliable performance, enabling users to relive nostalgic moments with old tapes.

The Toshiba SD-V594SC also incorporates several noteworthy technologies to enhance the viewing experience. The unit features a progressive scan output, which provides improved picture quality for DVDs. This technology reduces motion artifacts and delivers a clearer, more vibrant image, making it ideal for larger television screens. Furthermore, the VCR section comes equipped with features such as automatic tracking and a built-in 19-time playback, allowing for smooth playback of tapes and minimizing the wear on old VHS content.

Another significant characteristic of the SD-V594SC is its user-friendly interface. The remote control offers easy access to functions, including one-touch recording, which streamlines the process of transferring content from TV to VHS. This makes it a practical choice for those who wish to preserve their favorite shows from broadcast television.

Connectivity options are plenty with the Toshiba SD-V594SC. It includes composite video outputs, as well as S-Video output for those who seek better video quality. There are also audio outputs, allowing users to connect to their home theater systems for an immersive audio experience. The unit’s compact design fits easily into most entertainment centers, making it a convenient addition to any setup.

Overall, the Toshiba SD-V594SC epitomizes the fusion of old and new technologies. With its dual-format capabilities, enhanced picture quality, user-friendly functions, and versatile connectivity options, it stands as an attractive choice for consumers looking to enjoy both their vintage VHS tapes and modern DVDs in one reliable device. This combination ensures that users can make the most of their multimedia libraries, regardless of the medium.