Toshiba SD-V594SC Timer recording, Press VCR MENU. Select Òtimer REC Setó Then press Enter

Page 42
21/3/06, 9:44 AM
Notes:
¥ If the timer symbol ( ) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape length. Press TIMER REC to cancel the timer program or press EJECT to remove the cassette tape.
¥ During timer recording standby mode, the VCR mode cannot be operated. To use the VCR, first press TIMER REC then press DVD/VCR SELECT to change to VCR mode. After VCR mode is selected, press TIMER REC again to put the VCR into timer recording standby mode.
¥ If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER REC again within the programmed time, the recording operation will start again.
¥ After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock and reprogram any timer recording.
¥ If the cassette is ejected when TIMER REC is pressed, the erase prevention tab of the cassette may have been removed 34 .
¥ During Timer recording, the power cannot be turned off.
Notes:
¥ The timer recording will start at 5 seconds before the preset starting time.
¥ If the timer symbol ( ) does not appear on the display when TIMER REC is pressed, the cassette is not inserted
ENTER
CANCEL
VCR MENU
EJECT
DVD/VCR SELECT
TIMER REC
To enter other programs, repeat steps 2 through 4.
¥ To return to the ￿normal￿￿￿￿￿ ￿￿￿￿￿screen,￿￿￿￿￿￿￿￿￿￿￿
press VCR MENU￿￿twice. ￿￿￿
〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉
Press TIMER REC. The timer symbol ( ) will appear on the display and the VCR standbys for recording.
At the same time, VCR mode will
change to DVD mode automatically. You can use DVD even if the VCR is in the timer recording mode.
If you do not use the DVD, turn the power off.
DVD/VCR
SET +/Ð

Recording (VCR)

Timer recording

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.

Timer recording

Preparation:

 

5

¥

Press DVD/VCR to operate the DVD/VCR.

¥

Press DVD/VCR SELECT to select the VCR mode.

¥

Load a cassette tape with the erase prevention tab

 

 

intact.

 

 

¥

Check the time and date are correct

.

 

Example: Program a timer recording for the 26th day, channel 125 (Cable TV), 11:00 - 11:30 PM on timer

program number 1 (Tape speed: SLP).

 

 

 

Press VCR MENU. Select ÒTIMER REC SETÓ,

 

1

then press ENTER.

￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿

 

 

6

 

 

 

 

￿￿￿￿￿￿￿￿￿￿￿

 

 

 

 

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

 

 

2Press SET + or Ð to select one￿￿￿￿of ￿￿￿￿￿￿￿￿the program￿￿ line, then press ENTER. ￿￿￿ ￿￿￿

 

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

34 .

Press SET + or Ð to select the date, then press

 

3 ENTER.

￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿ ￿￿￿￿￿

 

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

4Set the start time, end time, ￿channel￿￿￿￿￿ ￿￿￿￿￿and￿￿￿￿￿￿￿tape￿￿￿￿

speed as in step 3. ￿￿ ￿￿￿

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

Notes:

¥Press CANCEL to move cursor backward for correction.

¥To record from external source set the channel to ÒL1Ó or ÒL2Ó.

42

2I40301A-En_p40-43

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents SD-V594SC Introduction Location of the required MarkingS3125A IntroductionLightning Power source HeatDisc Wait PrecautionsDo not use the DVD/VCR when moisture condensation may occur Moisture condensation occurs during the following casesOn handling discs On cleaning discsStructure of disc contents On storing discsPlayable USB Mass Storages About this ownerÕs manualOn Video CDs Equipment Brand ModelsContents Identification of controls Front panelRear panel Disc operation status Display windowVCR operation status While watching TV While operating a tapeTV control buttons Remote controlDVD Menu button ¥CABLE BOX control buttonsInserting batteries OperationPower TV Multi brand remote controlSetting TV control codes Table of TV brand codes Display Input Select Program VOL +/Ð EnterBrand name Brand CodeConnections Antenna connectionsAntenna to DVD/VCR connection UHFSet the TV/CABLE menu option to Òtvó mode Connections Set the TV/CABLE menu option to Òtvó modeTo the Òtvó mode DVD/VCR to TV connectionCable TV connections Connections Allows Prevents Connecting to a TV Basic connectionConnections Progressive outputsInterlaced outputs Connecting to a display Using the Hdmi cable About HdmiWhen Hdmi Output setting is ÒOffÓ Picture Output ¥ DVD Mode¥ VCR Mode During Hdmi OutputDolby Digital Connecting to an audio equipmentConnecting to an amplifier equipped with a DTS decoder Dolby Surround Pro LogicMPEG2 sound Connecting to a USB Mass Storage Connecting to a USB Mass StorageBasic setup VCR Setting the video channelSetting the video channel Power DVD/VCR TV/VCR DVD/VCR SelectDVD/VCR Setting the languageSetting the language Enter SET +/Ð VCR Menu DVD/VCR SelectAuto Clock adjustment Clock settingAuto Clock setting Power DVD/VCR Call Enter SET +/Ð VCR Menu DVD/VCR SelectTo set Standard Time Press SET + or Ð to select your time zone, then press EnterBasic setup VCR Manual clock settingSET +/Ð Enter Cancel Press SET + or Ð to set the month, then pressTV/CABLE selection Tuner settingSetting channels automatically DVD/VCR Enter SET +/Ð VCR Menu DVD/VCR SelectEnter SET +/Ð VCR Menu To ADD/DELETE channelsNoise elimination To delete channelsUnloading Loading and unloading a cassette tapeLoading To prevent accidental erasureCassette tape playback Playback Rewind or forward the tapeDVD/VCR Stop Play FWD REV DVD/VCR Select Special playback Convenience function Repeat playback Zero return functionStop Viss +/Ð CLOCK/COUNTER DVD/VCR Select Clock/counter display Video index search systemSqpb S-VHS Quasi Playback CounterRecording VCR Recording a TV programRecording a TV program SP/SLP DVD/VCR Select REC/OTRRecording one program while watching another To stop recordingTo stop recording temporarily Stop PAUSE/STILL TV/VCROne-touch Timer Recording OTR One-touch Timer Recording OTRStop SP/SLP DVD/VCR Select REC/OTR Press VCR MENU. Select Òtimer REC Setó Then press Enter Timer recordingTimer recording Press SET + or Ð to select the date, then pressSET +/Ð Enter Cancel VCR Menu DVD/VCR Select Timer REC Setting procedure To set daily/weekly timerTo confirm or cancel a program If the programs overlap anotherOther functions VCR Stereo recording and playback Second Audio Program SAPStereo recording and playback Second Audio Program SAP Enter SET +/Ð VCR Menu Audio SelectDuplicating a video tape Duplicating a video tapeDVD/VCR Input Select Stop SP/SLP Recording a DVD/CD disc Press DVD/VCR Select selector to select the DVD modePress Stop when you finish recording Duplicating a DVD or CD discVCD Basic playback To start playback in the stop modePlaying a disc Basic playback DVDOPEN/CLOSE Or standing by for timer recordingBasic playback Playing a Disc while the VCR section is recordingVcddvd Playing in slow-motion VCD Playing in fast reverse or fast forward directionsVcddvd Playing frame by frame VCD Locating a chapter or trackAdvanced playback DVD Zooming/Locating desired sceneVCD Zooming Display JumpMarking desired scenes Enter Clear MarkerVCD A-B Repeat playback Repeat playback/A-B Repeat playbackVcddvd Repeat playback Enter Play Playmode RPTVCD Random playback Program playback/Random playbackVCD Program playback Enter Clear Play PlaymodeDVD Title selection Changing angles/Title selection/DVD menuDVD Changing angles DVD DVD menuChanging soundtrack language Setting surround sound DVD Changing soundtrack languageAudio To turn off the PBC see Subtitles/To turn off the PBCDVD Subtitles Enter Subtitle PlaymodeLimitations on MP3/WMA/JPEG/DivX¨ playback MP3/WMA/JPEG/DivX and Audio CD operationMP3/WMA/JPEG/DivX¨ data information Limitations on displayEnter Return Stop Play DVD/USB OPEN/CLOSE Loading mediaMP3/WMA and Audio CD playback Press Stop to end playbackSlide show playback TOP Menu Zoom DVD MenuSkip Playing DivX¨ VOD content DivX¨ playbackEnter Stop Play Repeat playback CD/USB Random playback CD/USBProgram playback CD/USB Enter PlayBrowser View Program View Function setup DVD Customizing the function settingsVCD Setting procedure Enter Return SetupSetting details Other Menu, Subtitle, AudioEnglish, Francais, Espanol Original AudioJpeg Interval Picture ModeDisplay OffPCM DRCDigital Out BitstreamSet the new password Parental control settingIf you forget the password HD JpegProgressive OutputInterlace DivX¨ VODEnter Return Play OPEN/CLOSE Playback will commence if the entered password was correctDVD Temporary disabling of rating level by DVD disc Load a DVD disc and press Play or OPEN/ Close on the unitLanguage code list OthersTroubleshooting Symptoms SolutionsGeneral SpecificationsSupplied accessories Input/OutputCanadian Warranty Information Garantie Canadienne Memo Others2I40301A-Enp70-BACK 21/3/06, 946 AM

SD-V594SC specifications

The Toshiba SD-V594SC is a versatile and innovative dual-format DVD player and VCR combo that serves as a bridge between traditional and modern media. With its ability to play both DVDs and VHS tapes, the SD-V594SC appeals to a broad audience, accommodating those who still cherish their classic VHS collections while enjoying the convenience of DVD technology.

One of the standout features of the SD-V594SC is its compatibility with a wide range of formats. It supports not only standard DVDs but also DVD-R, DVD-RW, and various other DVD formats, ensuring users can play their favorite movies and shows without hassle. On the VHS side, it delivers a reliable performance, enabling users to relive nostalgic moments with old tapes.

The Toshiba SD-V594SC also incorporates several noteworthy technologies to enhance the viewing experience. The unit features a progressive scan output, which provides improved picture quality for DVDs. This technology reduces motion artifacts and delivers a clearer, more vibrant image, making it ideal for larger television screens. Furthermore, the VCR section comes equipped with features such as automatic tracking and a built-in 19-time playback, allowing for smooth playback of tapes and minimizing the wear on old VHS content.

Another significant characteristic of the SD-V594SC is its user-friendly interface. The remote control offers easy access to functions, including one-touch recording, which streamlines the process of transferring content from TV to VHS. This makes it a practical choice for those who wish to preserve their favorite shows from broadcast television.

Connectivity options are plenty with the Toshiba SD-V594SC. It includes composite video outputs, as well as S-Video output for those who seek better video quality. There are also audio outputs, allowing users to connect to their home theater systems for an immersive audio experience. The unit’s compact design fits easily into most entertainment centers, making it a convenient addition to any setup.

Overall, the Toshiba SD-V594SC epitomizes the fusion of old and new technologies. With its dual-format capabilities, enhanced picture quality, user-friendly functions, and versatile connectivity options, it stands as an attractive choice for consumers looking to enjoy both their vintage VHS tapes and modern DVDs in one reliable device. This combination ensures that users can make the most of their multimedia libraries, regardless of the medium.
Top Page Image Contents