Toshiba SD-V594SC Basic playback, Open/Close, Playing a Disc while the VCR section is recording

Basic playback (DVD)

To obtain a higher quality picture

POWEROccasionally, some picture noise not usually visible on the TV screen during a normal broadcast may appear while playing a DVD video disc.

It is because due to high resolution pictures on these discs which include a lot of information. The amount of noise depends on the disc you use with this unit. You should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.

	About DVD VCD	CD ￿￿￿
STOP	The DVD VCD CD	icons on the heading bar show the playable discs for the
	function described under that heading.

	PLAY	DVD	: You can use this function with DVD video discs.
	PAUSE/STILL	VCD	: You can use this function with Video CDs.
	DVD/VCR SELECT	￿￿￿CD	: You can use this function with Audio CDs and CD-R/RW CDs.
	OPEN/CLOSE		: You can use this function with USB Mass Storage.
DVD	Basic playback
VCD
CD
To pause playback (still mode)				Playing a Disc while the VCR section is recording
Press PAUSE/STILL during playback.				or standing by for timer recording
	To resume normal playback, press			1) Start to record.

PLAY.

Follow steps 1~5 on page ￿￿.

¥ If the DVD/VCR is standing by for recording, turn on

¥The sound is muted during still mode.

To stop playback

Press STOP.

To remove the disc

Press OPEN/CLOSE.

Remove the disc after the disc tray opens completely.

the DVD/VCR.

2)Press DVD/VCR SELECT selector to select DVD mode.

3)Play a disc.

Follow steps 4 ~ 6 on page 47 .

¥Press PLAY if the DVD/VCR does not start to play a disc automatically.

4)Stop to play.

Press STOP to stop play back a disc.

Screen saver function

The screen saver operates when you leave the unit in DVD stop mode for approx. five minutes.

The screen will repeatedly get dark gradually and back to normal.

Please press any button when you want to return to an usual screen.

To turn on or off the screen saver, see page .

Be sure to press OPEN/CLOSE to close the disc tray after you remove the disc.

Notes:

¥If a non-compatible disc is loaded, ÒIncorrect DiscÓ, ÒRegion Code ErrorÓ or ÒParental ErrorÓ will appear on the TV screen according to the type of loaded disc. In this case, check your disc again ￿￿￿.

¥Some discs may take a minute or so to start playback.

¥When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit, ÒReadingÓ will appear on the display for a few minutes and then ÒIncorrect DiscÓ will continue to be displayed.

¥Some discs may not work the resuming facility.

¥Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 56 .

¥Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

¥Do not move the unit during playback. Doing so may damage the disc.

¥Use the OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the unit to malfunction.

¥Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to malfunction.

¥In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press POWER on your remote control once the movie is completed.

¥There may be a slight delay between the button is pressed and the function activates.

¥The screen saver does not operate when connecting this DVD/VCR to the TV using the HDMI cable.

48

2I40301A-En_p48-51 48 21/3/06, 9:44 AM