About changing the power level. | ge.com |
The power level may be entered or changed before entering the time for Time Cook.
1 Press POWER LEVEL repeatedly to select power level 0 to HI.
2 Turn the dial to enter cooking time.
3 Press START.
Variable power levels add flexibility to microwave cooking. The power levels on the microwave oven can be compared to the surface units on a range. Each power level gives you microwave energy a certain percent of the time. Power level 70 is microwave energy 70% of the time. Power level 30 is energy 30% of the time. Most cooking will be done on HI which gives you 100% power. HI power level will cook faster but food may need more frequent stirring, rotating or turning over. A lower setting will cook more evenly and need less stirring or rotating of the food. Some foods may have better flavor, texture or appearance if one of the lower settings is used. Use a lower power level when cooking foods that have a tendency to boil over, such as scalloped potatoes.
Rest periods (when the microwave energy cycles off) give time for the food to “equalize” or transfer heat to the inside of the food. An example of this is shown with power level
If microwave energy did not cycle off,
the outside of the food would cook before the inside was defrosted.
Here are some examples of uses for various power levels:
HI: Fish, bacon, vegetables, boiling liquids.
Medium 50: Slow cooking and tenderizing for stews and less tender cuts of meat.
Low 20 or 30: Defrosting; simmering; delicate sauces.
Warm 10: Keeping food warm; softening butter.
Safety Instructions
Operating Instructions
About the time features.
Time Cook
Time Cook I
Allows you to microwave for any time up to 99 minutes.
HI power level is automatically set, but you may change it for more flexibility.
1 Change power level if you don’t want full power. (Press POWER LEVEL repeatedly to select a desired power level.)
2 Turn the dial to enter cooking time.
3 Press START.
You may open the door during Time Cook to check the food. Close the door and press START to resume cooking.
Press MORE or LESS to add or subtract 10 seconds of cooking time during countdown.
Time Cook II
Lets you change power levels automatically during cooking. Here’s how to do it:
1 Change the power level if you don’t want full power. (Press POWER LEVEL. repeatedly to select a desired power level.)
2 Turntime. the dial to enter the first cook
3 Press POWER LEVEL. Change the power level if you don’t want full power. (Press POWER LEVEL repeatedly to select a desired power level.)
4 Enter the second cook time.
5 Press START.
At the end of Time Cook I, Time Cook II counts down.
Press MORE or LESS to add or subtract 10 seconds of cooking time during countdown.
9
Troubleshooting Tips
Consumer Support