Controlling Your TV with the Supplied Remote
The remote control can be compatible with various brands of TV by setting their control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs.
SETTING TV CONTROL CODES
1. While holding down PROG/MEMO. button, enter the two digits of your TV’s brand code (listed on page 39) using number buttons.
2. Release PROG/MEMO.
By pressing | You can |
POWER | Turn the TV on or off. |
|
|
CH (4/3) | To select TV channels in the |
| upper or lower direction. |
|
|
VOLUME | Adjust the volume of the TV. |
|
|
INPUT | Switch the TV’s input source |
| between the TV and other input |
| sources. |
|
|
Important
Some TVs may not respond to all the operations above, or may not be operated at all with this remote control. In this case, operate your TV with its own remote control.
Notes
For some brands, several control codes (brand codes) are allocated. Try each of them until the buttons work on your TV.
If you replace the remote control’s batteries, set the brand code again.
TV Control Buttons
38