GE JGRP16 warranty After Self-Cleaning, How to Set Delay Start of Cleaning

Page 20

OPERATING THE SELF-CLEANING OVEN

(continued)

After Self-Cleaning

You may notice some white ash in the oven. Just wipe it up with a damp cloth after the oven cools.

If the oven is not clean after one clean cycle, repeat the cycle.

If white spots remain, remove them with a soap-filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually

a salt residue that cannot be removed by the clean cycle.

If the shelves become hard to slide, wipe the shelf supports with cooking oil.

NOTE: No functions can be programmed before the door automatically unlocks.

How to Set Delay Start of Cleaning

Quick Reminder:

1.Prepare the oven for cleaning.

2.Close the oven door completely.

3.Press the CLEAN pad.

4.Press the INCREASE or DECREASE pad until the desired Clean Time appears.

5.Press the STOP TIME pad.

6.Press the INCREASE or DECREASE pad

until the desired Stop Time appears in the display.

Delay Start is setting the oven timer to start the clean cycle automatically at a later time than the present time of day.

NOTE: Before beginning, make sure the oven clock shows the correct time of day.

1.Follow steps to prepare the oven for cleaning.

2. Press the CLEAN pad.

CLEAN

c1

3.Press the INCREASE or DECREASE

~pad to enter the Clean Time.

n

4. Press the STOP TIME pad. “STOP

 

STOP

TIME” and the earliest Stop Time you

TIME

can set will appear in the display.

The earliest Stop Time will be the Clean Time selected plus the time of day. For example: If the

Clean Time is 3 hours and the time of day is 6:00, the Stop Time that appears in the display will be 9:00.

5.Press the INCREASE pad to change the Stop Time to a later time of day if desired. For example: If you set Stop Time at 11 :00, oven will start clean cycle at 8:00 and end at 11 :00. The door latches automatically.

The self-clean cycle will automatically begin after “CLEAN” is displayed and the time for clean cycle is set. The words “ON” and “LOCK” will appear in the display when the door automatically locks. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCK light goes off.

6.When the LOCK light is off, open the door.

NOTE: During a delayed self-clean operation you can find out when the oven is set to turn on by pressing and holding the CLEAN pad for 3 seconds.

v n

20

Image 20
Contents Iuse and Care Wide Do not try to light any appliance ~ YOU Need ServiceHelp US Help YOU 11, Ortant Safety Notice Do not use the oven as a storage area Important Safety InstructionsSave These Instructions Removable Oven Bottom 24,25 Model and Serial Numbers Features of Your OvenTimer Oven Vent Www Timer To Set the TimerTo Reset the Timer To Cancel the Timer Power OutageUsing Your Oven How to Set Your Oven for Baking Baking$ \lf Positions Oven Moisture Automatic Oven Shut OffPan Placement PreheatingBaking Pans Type of Food Shelf Position~ king Guides CookiesPies CakesHow to Time Bake How to Set Immediate Start and Automatic StopTimed Baking To set the clock, first pressQuick Reminder Adjust the Oven THERMOSTAT-DO IT YourselfET w to Set Delay Start and Automatic Stop Roasting Use of Aluminum FoilRoasting Guide Frozen RoastsQuestions and Answers BroilingOven door should be closed during broiling Should I salt the meat before broiling?Broiling should always be done with the oven door closed CommentsOperating the SELF-CLEANING Oven Before a Clean CycleTo Set the Oven for Cleaning After Self-Cleaning How to Set Delay Start of CleaningSalt residue that cannot be removed by the clean cycle Quick Reminder Prepare the oven for cleaning’ \stions and Answers Broiler Pan and RackCare and Cleaning To Clean the DoorLift-Off Oven Door Removable Storage DrawerLight Replacement Oven ShelvesControl Panel Painted SurfacesMinor Adjustments YOU can Make Adjusting Orifice HoodsRemovable Oven Bottom To RemoveQUESTIONS? USE this Problem Solver ‘1 and Oven Burner Air Adjustment ShuttersProblem Possible CauseProblem Solver We’ll Be There Warranty