GE PCS, ECS, ECD, MCD, MCS, PCD manual Before You Call For Service, Clock Display Cause

Page 19

Before You Call For Service

IMPORTANT:

If a failure code is displayed, the oven will beep continuously until the user presses the CANCEL • SECURE key. The oven will not heat after a failure code is displayed. Call a qualified appliance technician to repair the oven.

Clock Display

Cause

F0.

F1.

F2.

F3.

F4.

F6.

F8.

Touch pad is stuck in depressed position.

Relay circuit failure.

Oven temperature exceeded the clean runaway temperature (self-clean mode only) or the cooking runaway temperature (cooking modes only).

Short circuit in the oven temperature sensor.

Open circuit in the oven temperature sensor.

Failure in the EEPROM check comparison. (Only time of day and timer will operate.)

Failure of the self-clean automatic door latch circuit.

Failure of the door latch motor. Occurs when the motor runs for two minutes without the door locking in self-clean mode.

Oven Failure Codes

Image 19

Contents Ta b l e o f C o n t e n t s USE and Care Manual Classic Wall OvenPage For service and warranty information, see Important Safety InstructionsImportant Safety Instructions General Safety Precautions Follow these two steps to set the correct time of day Setting The Time Of DayOven Operation Getting Started Securing the ControlsOven Operation Control Panel Oven Operation GlideRack Oven Rack InstallationHelpful Hints When Using Your GlideRack Oven Rack Oven Operation Oven Racks and SupportOven Operation Oven Modes Oven Mode SelectionPre-Heating the Oven Broiling Oven Operation What Is Pure Convection?Baking and Roasting Tips Multiple Rack BakingDelay Timed Cooking Common Baking ProblemsImportant things to know about the meat probe Oven Operation Delay Timed CookingUsing the Meat Probe Probe PlacementTo use the minute timer Using the Minute TimerDehydrating/Defrosting Brass, Chrome and Copper Surfaces Cleaning Porcelain SurfacesDoor Handle/Control Housing CareTo Start the Self-Clean Cycle Care and CleaningSelf-Cleaning To Prepare the Oven for Self-CleaningTo calibrate the oven temperature Care Self-CleaningCleaning Adjusting the Oven Temperature Self-Cleaning TipsTo replace a light bulb, follow these steps Cleaning AccessoriesReplacement Oven Light Bulb Stainless Steel Cleaner Care Replacing the Oven LightTime Temp + or Time Temp key to Before You Call For Service Problem Solution GuideClock Display Cause Before You Call For ServiceWhat Is Not Covered Service and Product Warranty Product MaintenanceIf You Need Service What Is CoveredPage Page Business Reply Mail Warranty Information