GE JTP20 installation instructions Installation Instructions

Page 4

Installation Instructions

Pre-Installation Checklist cont.

Place the oven on a table or platform even with the cutout opening. (Platform must support 150 lbs. single, 275 lbs. double.)

Remove the bottom trim from the top of the oven. It will be installed at the end of the installation process. The trim is wrapped separately and taped to the top of the unit.

4

Image 4
Contents Installation Installation Instructions Pre-Installation Checklist Do not Lift the Door By the HandleInstallation Instructions Cutout for Single Built-In Oven Cutout for Double Built-In Oven Cutout for Single Built-In Oven Under Counter 240V / 208V Junction Box LocationElectrical Connections Conduit 48 1/2 LongB3 New Construction Four-Conductor Branch Circuit Connection Securing the Oven in the Opening C1 Sliding the Oven Into the OpeningC3 Preparing for the Bottom Trim Installation Replacing the Oven Door Operation Checklist Pre-Test ChecklistPage