GE JTP20 Cutout for Single Built-In Oven Under Counter, 240V / 208V Junction Box Location

Page 7

Installation Instructions

A3

Cutout for Single Built-In Oven Under Counter

Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.

25

240V / 208V Junction Box Location

Gas and electrical connections for 30gas cooktop must be located in an adjacent accessible location to the right. For 36gas cooktop, the connections may be made

to the left.

5

Top and/or side fillers may be necessary

if unit is positioned between existing cabinets. Be sure they are attached securely, since they will anchor the oven in the cabinet.

28 1/2Min. 28 5/8Max.

27 1/4Min.

27 5/16Max.

Allow 1overlap top of oven and 11/16overlap side edges of cutout

22Min.

 

 

 

36

 

 

 

 

 

Typical

Above

 

 

 

 

 

Countertop

Support

 

 

 

 

 

Height

Platform

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24

 

 

 

 

 

 

 

 

 

3/4

Support Platform

Required

5 9/16

Reference dimension for maximum support height with typical 36countertop height

MUST SUPPORT 150 LBS.

NOTE: This oven is not approved to be installed under a solid disk, induction or downdraft modular cooktop.

7

Image 7
Contents Installation Installation Instructions Do not Lift the Door By the Handle Pre-Installation ChecklistInstallation Instructions Cutout for Single Built-In Oven Cutout for Double Built-In Oven 240V / 208V Junction Box Location Cutout for Single Built-In Oven Under CounterConduit 48 1/2 Long Electrical ConnectionsB3 New Construction Four-Conductor Branch Circuit Connection C1 Sliding the Oven Into the Opening Securing the Oven in the OpeningC3 Preparing for the Bottom Trim Installation Replacing the Oven Door Pre-Test Checklist Operation ChecklistPage