GE JRP20 owner manual Using the clock and timer, Consumer

Page 9

Using the clock and timer.

Not all features are on all models.

Safety

Make sure the clock is set to the correct time of day.

To Set the Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a delayed cooking or a delayed self-cleaning cycle.

Touch the TIMER/CLOCK pad twice.

Touch the + or – pad.

If the + or – pad is not touched within one minute after you touch the TIMER/CLOCK pad, the display reverts to

the original setting. If this happens, touch the TIMER/CLOCK pad twice and reenter the time of day.

Touch the START pad until the time of day shows in the display. This enters the time and starts the clock.

To check the time of day when the display is showing other information, simply touch the CLOCK pad. The time of day shows until another pad is touched.

Instructions Operating Instructions

To Turn Off the Clock Display

If you have several clocks in your kitchen, you may wish to turn off the time of day clock display on your oven.

Touch the TIMER/CLOCK pad once to turn off the time of day display. Although you will not be able to see

it, the clock maintains the correct time of day.

Touch the TIMER/CLOCK pad twice to recall the clock display.

Care and

To Set the Timer

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.

Touch the TIMER/CLOCK pad.

Touch the + or – pad until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than 59 minutes should be changed to hours and minutes.

The timer is a minute timer only.

The CLEAR/OFF pad does not affect the timer.

If you make a mistake, touch the TIMER/CLOCK pad and begin again.

Touch the START pad. The time will start counting down, although the display does not change until one minute has passed.

When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the TIMER/CLOCK pad is touched.

Cleaning Troubleshooting Tips

To Reset the Timer

If the display is still showing the time remaining, you may change it by touching the TIMER/CLOCK pad, then touching the

+or – pad until the time you want appears in the display.

If the remaining time is not in the display (clock, start time or cooking time are in the display), recall the remaining time by touching the TIMER/CLOCK pad and then touching the + or – pad to enter the new time you want.

Consumer

To Cancel the Timer

Touch the TIMER/CLOCK pad twice.

9

Support

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Write the model and serial numbers here Model # Serial # Wall OvenBuilt-In ElectricImportant Safety Notice Safety Instructions Safety PrecautionsInstructions Cook Meat and Poultry THOROUGHLY… Using the oven controls Operating Instructions Safety InstructionsCare and Cleaning How to Set the Oven for Baking or Roasting Using the ovenPreheating and Pan Placement Before you begin…How to Set the Oven for Broiling Instructions SafetyBroiling Guide HI BroilConsumer Using the clock and timerCleaning Operating Instructions Using the timed baking and roasting featuresConsumer Support Troubleshooting Tips Care How to Set an Immediate Start and Automatic StopCare and Cleaning Troubleshooting Tips Special features of your oven controlFahrenheit or Celsius Temperature Selection Hour Shut-OffTones at the End of a Timed Cycle Hour, 24 Hour or Clock Black-OutYour control is set to use a 12 hour clock Changing the Speed of the + or Pads Cook and HoldCare Consumer Support Troubleshooting TipsHow to Exit the Sabbath Feature Adjust the oven thermostat-Do it yourself To Adjust the ThermostatType of margarine will affect baking performance Care and Cleaning Troubleshooting Tips Consumer Support Using the self-cleaning ovenBefore a Clean Cycle Oven must be cool in order to set the self-clean cycleAfter a Clean Cycle Operating Instructions SafetyInstructions Care and Cleaning Troubleshooting Tips Care and cleaning of the ovenHow to Remove Packaging Tape Lift-Off Oven DoorCare Troubleshooting TipsTroubleshooting Tips Consumer Support Care and CleaningStainless Steel Surfaces on some models Oven Light Bulb on some modelsBefore you call for service… During clean cycle See the Using the self-cleaning oven sectionOpen after a Clean cycle Is on when you wantA number Power outageOr letter flash Display goes blankWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Safety Instructions Operating GE Built-In Electric Oven WarrantyGE Will Replace What GE Will Not CoverParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

JRP20 specifications

The GE JRP20 is an advanced jet engine designed by General Electric, specifically engineered to meet the demands of modern aviation with unmatched performance, efficiency, and reliability. This innovative engine boasts a variety of features and technologies that position it as a leader in the aerospace industry.

One of the standout features of the GE JRP20 is its advanced aerodynamic design. The engine employs state-of-the-art computer simulations to optimize airflow, significantly enhancing its performance and fuel efficiency. Its high bypass ratio allows for quieter operation while delivering powerful thrust necessary for a wide range of aircraft, including regional jets and narrow-body airliners.

A key characteristic of the GE JRP20 is its modular design. This design philosophy not only simplifies maintenance but also allows for quick and efficient repairs and part replacements. By employing modular components, airlines can minimize downtime and reduce operational costs, ultimately translating to increased profitability over the engine's lifecycle.

Incorporating cutting-edge materials is another hallmark of the JRP20. The engine utilizes advanced composite materials and super alloys that enhance durability and reduce weight. These materials contribute to improved fuel efficiency and performance while simultaneously extending the engine's lifespan. The reduction in weight helps optimize the aircraft's overall efficiency, allowing it to carry larger payloads without compromising performance.

Additionally, the GE JRP20 is equipped with advanced digital technologies that provide real-time data monitoring and analytics. These technologies enable predictive maintenance, helping operators to anticipate issues before they arise. By analyzing data from various engine components, airlines can make informed decisions about maintenance schedules and operational practices, enhancing overall safety and reliability.

One of the most impressive aspects of the JRP20 is its commitment to sustainability. The engine is designed to produce lower emissions compared to its predecessors, aligning with the aviation industry's shift toward greener technologies. Enhanced fuel efficiency not only reduces environmental impact but also helps airlines lower operational costs, making the JRP20 a smart choice for environmentally conscious carriers.

In summary, the GE JRP20 stands out as a pioneering jet engine that combines advanced aerodynamics, modular design, high-performance materials, and innovative digital capabilities. Its focus on efficiency, reliability, and sustainability positions it as a formidable choice for airlines looking to enhance performance while reducing their carbon footprint. The JRP20 is a significant step forward in the evolution of jet propulsion technology, setting new standards for the future of aviation.
Top Page Image Contents