Recording a Radio Program | Timer Function |
| • The timer enables you to switch the system on or off at specific times. |
You can record a radio program of your choice. | • If you no longer want the system to be switched on or off automatically, you must cancel the timer. |
You do not need to adjust the volume, as it has no effect on the recording. | • Before setting the timer, check that the current time is correct. |
| • For each step, you have a few seconds to set the required options. |
| If you exceed this time, you must start again. |
Example: You wish to wake up to music every morning.
Switch the system |
| Press TIMER/ CLOCK |
on by pressing |
| until TIMER is |
1STANDBY/ON. |
| 2 displayed. |
|
|
|
3 Press the ENTER button.
•ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any
Switch the system
1 on by pressing
STANDBY/ON.
Select the radio
4 station that you wish to record by pressing
/DOWN or UP/
button .
Insert a blank
2 cassette in TAPE 2.
5 Press(REC/PAUSE)
button.
•REC is displayed in red and recording starts.
Select the
3 TUNER function
by pressing
TUNER/BAND.
6 To stop recording, press 
button.
4 Set the timer switch-on time.
a. Set the hour by pressing 
or 
button.
b. Press ENTER .
•The minutes flash.
c.Set the minutes by pressing 
or
button.
d.Press ENTER.
•OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch- off time already set; you can now set the timer
Press 
or 
button
7to select the source to be played when the system switches on.
•TAPE (cassette) : Insert a cassette tape.
•TUNER (radio) : a Press ENTER. b Select a preset
station by pressing
or 
.
•
5 Set the timer switch-off time.
a. Set the hour by pressing 
or 
button.
b. Press ENTER.
•The minutes flash.
c.Set the minutes by pressing 
or
button.
d.Press ENTER.
•VOL 10 is displayed, where 10 corresponds to the volume already set.
8 Press ENTER to confirm the timer.
Press 
or 
6 button to adjust the
volume level and press ENTER.
•The source to be selected is displayed.
Press STANDBY/ON
9 to set the system to standby mode.
•
is displayed to the top right of the time, indicating that the timer has been set.
•The system will switch on and off automatically at the required times.
MISCELLANEOUS
65
Note | • If the timer switch on and off times are identical, the word ERROR is displayed. |
| ||
| • You can also use | , | button on the remote control to instead Multi Jog or | button |
in step 4,5,6,7. | 66 |
|
